个人简介
刘丹阳，男，博士/博士后，特聘副教授，博士生导师、硕士生导师。现任日本軽金属学会正会员，中国有色金属学会会员，中国机械工程学会热处理分会青工委委员。
主要从事航空航天用铝合金成分设计、先进制备加工、微观组织与性能调控、模拟计算、腐蚀防护机理等基础与应用研究。
主持或参与十四五国家重点研发计划、国家自然科学基金面上项目、国家自然科学基金面上地区项目、湖南省自然科学基金面上项目、XX运载火箭选材总装预研项目、XX运载火箭关深项目、国家XX配套项目等20余项。
在Journal of Materials Science and Technology、Corrosion Science、International Journal of Fatigue、Science Bulletin、Journal of Alloys and Compounds、Materials Characterization、Trans Non-ferrous Met Soc China、金属学报等国内外权威期刊发表学术论文50余篇。
担任国际权威期刊Corros. Sci., J. Mater. Sci. Technol., J. Alloys Compd., Mater. Sci. Eng. A, Mater. Charact. 等审稿人。
课题组长期与中国运载火箭研究院一院、宇航材料研究所、中国航空制造研究院、成飞、沈飞、西飞、商飞、中船重工725所、中铝集团材料研究院、西南铝业（集团）有限公司等单位保持密切项目技术合作，培养优秀学生可优先推荐到合作单位担任技术领导岗位工作。
招收硕士研究生2~3名，请有志于从事航空航天材料制备与加工的同学邮件或者电话联系。
邮箱：liudanyang@csu.edu.cn
手机：15273188083
研究方向:
[1] 航空航天用铝合金成分设计、性能与组织调控
[2] 航空航天用铝合金增材制造
[3] 铝基复合材料制备与加工
[4] 再生铝资源回收与高效利用
主持或参与的重点研究课题：
[1] 2014/09-2018/06，国家863项目《铝锂合金热处理机制及机理研究》；
[2] 2015/09-2018/06，XX运载火箭选材预研项目《XXXX\XXXX铝锂合金研制》；
[3] 2015/01-2018/06，XX运载火箭“关深”项目《XXXX铝锂合金设计许用值研究》；
[4] 2016/08-2019/12，国家配套项目《超高强铝锂合金研制》；
[5] 2019/12-2020/12，XX运载火箭选材预研项目《轻质高强可焊XXX级铝锂合金》；
[6] 2018/06-2022/06，XX运载火箭“关深”项目《XX铝锂合金表面处理及退火技术研究》；
[7] 2018/12-2022/12，国家配套项目《XXXX铝锂合金板材、锻件研制》；
[8] 2019/09-2020/09，日本軽金属学会立项《高刚度铝合金合金设计与热处理方案构建》；
[9] 2021/01-2023/01，国家配套项目《XXXX铝锂合金厚板强韧性和应力腐蚀协同调控技术研究》；
[10] 2021/12-2024.06，国家军品配套项目《大型**结构用XXXX铝锂合金环件材料研制与应用研究》；
[11] 2022/06-至今，国家重点研发项目《高强铝合金增材制造技术及应用》；
[12] 2022/06-至今，湖南省自科面上项目《高强铝锂合金晶界微结构组合模式及耐蚀机理研究》；
[13] 2022/06-2023/06，中国航空制造技术研究院《轻质耐损伤铝锂合金熔铸及轧制试验》；
[14] 2022/06-2024.07，国家配套项目《大规格XXXX铝锂合金板材与锻件制备》；
[15] 2023.01-至今，国家自然科学基金《基于微结构相构效关系的微合金化铝锂合金晶间腐蚀行为及机制研究》；
[16] 2024/02-至今，中国工程科技发展战略山东研究院《山东铝产业关键技术及产业链绿色低碳发展战略研究》。
部分学术论文代表作：
[26] Xin Liu, Wei Zhou, Nian Liu, Zhen-Zhen Liu, Guang-jun Zeng, Jian-mei Li, Chao Cai, Dan-yang Liu*, Jin-feng Li. The corrosion resistance improved by the coarsening precipitations containing Zn in the Al-4.0Cu-1.0Li-Mg alloy. Materials Characterization. 2025, 223: 114966.
[25] Guang-jun Zeng, You-jie Guo, Chen-chen Xiong, Hao-ran Li, Wei Zhou, Hui Xiang, Peng-cheng Ma, Yong-lai Chen, Jin-feng Li*, Dan-yang Liu*. Enhanced fatigue crack propagation resistance of Al-Cu-Li alloys via regulating grain structure and precipitation behavior. International Journal of Fatigue. 2025,197: 108916.
[24] Tian-le Liu, Yun-long Ma, San-xi Deng, Guang-jun Zeng, Hui Xiang, Wei Zhou, Dan-yang LIU*, Jin-feng Li*. Investigating formation behavior of P and Goss grains and mechanical properties of Al-Cu-Li alloy via well-designed annealing treatments. Materials Science & Engineering A. 2025, 927: 147967. Doi: 10.1016/j.msea.2025.147967.
[23] San-xi DENG, Jin-feng LI, Li WANG, Yue-yan CHEN, Zheng-wu XIANG, Peng-cheng MA, Yong-lai CHEN, Dan-yang LIU*. Strengthening mechanism of T8-aged Al-Cu-Li alloy with increased pre-deformation. Transactions of Nonferrous Metals Society of China, 2024, 34(10): 3151-3169.
[22] San-xi Deng, Zhen-zhen Liu, Guang-jun Zeng, Hui Xiang, Peng-cheng Ma, Jia-ming Yin, Li Kang, Si-han Wen, Jin-feng Li*, Dan-yang Liu*. The precipitation evolution and mechanical properties of an Al-Cu-Li-Mg alloy during natural aging. Journal of Materials Science and Technology. 2024, 192: 42-53.
[21] Zhen-zhen Liu, San-xi Deng, Mao Rao, Ji-rong Que, Jin-feng Li*, Dan-yang Liu*. Effect of grain thickness and T1 precipitate on the strength anisotropy of Al-4.0Cu-1.0Li-0.4Mg-0.4Ag-xZr Alloys under different heat-treatment. Journal of Alloys and Compounds. 2023, 968: 172105.
[20] San-xi Deng, Jin-feng Li*, Hong Ning, Ding-ding Lu, Guang-jun Zeng, Zhen-zhen Liu, Hui Xiang, Ji-rong Que, Dan-yang Liu*. Effect of Zr addition on the microstructure evolution and mechanical properties of extruded Al-Cu-Li-Mn alloys. Materials Characterization. 2023, 202: 113011.
[19] Gao, C.; Liu, X.; Zhao, D.;Guo, Y.; Chen, S.; Gao, F.; Liu, T.; Cai,Z.; Liu, D.*; Li, J. Recent Progress in Testing and Characterization of Hardenability of Aluminum Alloys: A Review. Materials 2023, 16, 4736.
[18] Tian-le Liu, Hao-ran Li, Yun-long Ma, Jin-feng Li *, Dan-yang Liu *, Ding-ding Lu, You-jie Guo. Investigation of anisotropy and structure variation of spray-formed 2195 Al-Li alloy via final temperature-controlled rolling and cold rolling[J]. Journal of Alloys and Compounds. 2022, 937: 168414.
[17] Ding-ding Lu, Hong Ning, San-xi Deng, You-jie Guo, Hui Xiang, Jin-feng Li*, Dan-yang Liu*. Influence of microstructure on fatigue crack propagation behaviors of Al-xCu-1.5Li-X alloys[J]. International Journal of Fatigue. 2023, 167: 107363.
[16] Ding-ding LU, Ben Lin, Tian-le Liu, San-xi Deng, You-jie GUO, Jin-feng LI *, Dan-yang Liu *. Effect of grain structure on fatigue crack propagation behavior of Al-Cu-Li alloys[J]. Journal of Materials Science and Technology, 2023, 148: 75-89.
[15] Dan-yang Liu, Jin-feng Li*, Chen Liu, Yun-long Ma, Yue Du, Yong-lai Chen, Xu-hu Zhang, Wen You, Rui-feng Zhang*, Quench sensitivity and microstructure evolution of the 2060 Al-Cu-Li alloy with a low Mg content[J]. Materials Characterization, 2021, 177: 111156.
[14] Danyang Liu, Li Yang, Zanyu Chen, Guoqiang Zou, Hongshuai Hou*, Jiugang Hu, Xiaobo Ji. Ultra-stable Sb confined into N-doped carbon fibers anodes for high-performance potassium-ion batteries [J]. Science Bulletin, 2020, 65(12): 1003-1012.
[13] Dan-yang Liu, Yun-long Ma, Jin-feng Li*, Rui-feng Zhang, Hideaki Iwaoka, Shoichi Hirosawa, Precipitate microstructures, mechanical properties and corrosion resistance of Al-1.0 wt%.Cu-2.5 wt%.Li alloys with different micro-alloyed elements addition[J]. Materials Characterization, 2020, 167: 110528.
[12] Dan-yang Liu, Jie-xia Wang, Jin-feng Li*, Yun-long Ma, Kai Zhang, Rui-feng Zhang, The effect of Ag element on the microstructure characteristic evolution of an Al-Cu-Li-Mg alloy[J]. Journal of Materials Research and Technology, 2020, 9-10: 11121-11134.
[11] Dan-Yang Liu, Jin-Feng Li*, Yong-Cheng Lin, Peng-Cheng Ma, Yong-Lai Chen, Xu-Hu Zhang, Rui-Feng Zhang, Cu/Li Ratio on the Microstructure Evolution and Corrosion Behaviors of Al-xCu-yLi-Mg Alloys[J]. Acta Metallurgica Sinica (English Letters), 2020, 3 (17): 1201-1216.
[10] Dan-yang Liu, Yun-long Ma, Jin-feng Li*, Cheng Huang, Yang Wang, Zhi-xiu Wang, Rui-feng Zhang, The influence of Zn addition on microstructure of an Al-1.7 Cu-4.0 Li-0.4 Mg alloy [J]. Journal of Materials Research and Technology, 2020, 9 (2): 2423-2439.
[9] Dan-yang Liu*, Jin-feng Li*, Tian-le Liu, Yunlong Ma, Hideaki Iwaoka, Shoichi Hirosawa, Kai Zhang, Rui-feng Zhang, Microstructure Evolution and Mechanical Properties of Al-Cu-Li Alloys with Different Preceding Rolling Schedules and Subsequent Artificial Ageing Heat Treatment[J]. Materials Characterization, 2020, 170: 110676.
[8]. Tian-le Liu, Jin-feng Li, Dan-yang Liu*, Yun-long Ma. Microstructure evolution and mechanical properties of the 2195 Al-Li alloy via different annealing and ramp heating-up treatments [J]. Metals, 2020, 10(7), 910.
[7] Dan-yang Liu, Feng-jian Sang, Jin-feng Li*, Nick Birbilis, Zhi-xiu Wang, Yun-long Ma, Rui-feng Zhang. The role of grain structure characteristics on the localised corrosion feature in the 1445 Al-Cu-Li alloy [J]. Materials Characterization, 2019, 158, 109981. [J]. Materials Characterization, 2019,158, 109981.
[6] Jin-feng LI, Jia-lei HUANG, Dan-yang LIU*, Yong-lai CHEN, Xu-hu ZHANG, Peng-cheng MA. Distribution and evolution of aging precipitates in an Al-Cu-Li alloy with high Li concentration [J]. Transactions of Nonferrous Metals Society of China, 2019, 29, 15-24.
[5] Jin-Feng Li*, Dan-Yang Liu, Hong Ning, Cheng Liu, Peng-Cheng Ma, Yong-Lai Chen, Xu-Hu Zhang. Experimental quantification of “hardenability” of 2195 and 2050 Al-Li alloys by using cold-rolled [J]. Materials Characterization, 2018, 03, 180-188.
[4] Dan-yang LIU, Jie-xia WANG, Jin-feng LI*. The microstructures evolution and mechanical properties disparity in 2070 Al-Li alloy with minor Sc addition [J]. Transactions of Nonferrous Metals Society of China, 2018, 28, 2151-2161.
[3] D.Y. Liu, J.F. Li*, Y.L. Ma, R.K. Gupta, N. Birbilis, R. Zhang. A closer look at the role of Zn in the microstructure and corrosion of an Al-Cu-Li alloy [J]. Corrosion Science, 2018, 145, 220-231.
[2] Liu Danyang, Li Jinfeng*, Zheng Ziqiao, Chen Yonglai, Zhang Xuhu. Microstructure and mechanical properties of 1441 Al-Li alloy with Er Micro-alloying [J]. Chinese Journal of Rare Metals, 2017, 41(07): 725-732.
[1] LI Jinfeng*, LIU Danyang, ZHENG Ziqiao, CHEN Yonglai, ZHANG Xuhu. Effect of Er micro-alloying on mechanical properties and microstructures of 2055 Al-Li alloy [J]. Acta Metallurgica Sinica, 2016, 52(07), 821-830.
专利：
[1] 一种提高铝锂合金薄板强塑性固溶前处理方法及其热处理方法[P]. 专利号：ZL 2016 1 113990.2.
[2] 一种提高冷变形铝锂合金强塑性前处理方法及其热处理方法[P].专利号：ZL 2016 1 1139992.1.
[3]一种测试金属材料淬透性的方法[P].专利号：ZL 2017 10225016.6
[4]一种耐损伤铝锂合金及其制备方法和应用[P].专利号：ZL202211582657.4
[5]一种高强高淬透性铝锂合金及其制备方法[P].申请号：202111552346.9
讲授课程：
《金属材料及热处理》
《材料力学性能与测试》
《有色金属熔炼与铸造》
工作经历
[1] 2014.9-2018.11
中南大学
|
材料科学与工程学院
|
博士研究生
[2] 2018.10-2021.3
中南大学
|
机电工程学院
|
博士后
[3] 2019.11-2020.11
横滨国立大学
|
工学研究院
|
访问学者
[4] 2021.8-至今
中南大学
|
材料科学与工程学院
|
特聘副教授