中文
  • 刘建
  • Doctoral Degree in Engineering
  • Associate Professor
  • 航空航天学院
 

 

Personal Information

刘建,瑞典隆德大学博士及博士后,航空航天学院特聘副教授。长期从事航空发动机结构的传热,涡轮叶片冷却,发动机热防护及新型强化换热结构的研究工作。目前已发表SCI期刊论文49篇,国际会议论文10余篇,发表专著1部。论文主要发表在Int. J. Heat Mass Transfer, ASME J. Heat Transfer, Int. C. Heat Mass Transfer, Int. J. Thermal Sciences, Applied Thermal Engineering, Energy, Numerical Heat Transfer, Part A等传热能源领域权威期刊,1篇论文入选ESI高被引用论文。目前Google总被引用800余次,h-index为14,以第一作者申请发明专利4项,主持横向科研项目2项,以骨干身份参与了国家自然科学基金青年及面上项目,瑞典能源局基础研究项目,西门子,CTH,瑞典GKN发动机公司的多项研究课题。


学习工作经历

  • 2020.05 – 至今 中南大学航空航天学院特聘副教授。 

  • 2019.05 - 2019.09 博士后 瑞典Lund University能源科学系。 

  • 2015.09 - 2019.05 博士 瑞典Lund University (2019QS排名世界92)能源科学系,导师为Bengt Sunden教授。 

  • 2014.04 - 2014.09 交流学习 美国University of Minnesota,导师为传热顶级期刊ASME J. Heat Transfer的主编,Terrence W. Simon教授。 

  • 2012.09 - 2015.03  硕士  西北工业大学  航空宇航制造工程。

  • 2008.09 - 2012.07  本科  西北工业大学  飞行器制造工程。


代表性论文

第一作者论文

1.     Wenxiong X, Jian L*, Mengfei R. (2021). Improvement of mixing efficiency in the combustion chamber of a powder-fuel ramjet engine[J]. Frontiers in Energy Research, 538.

2.     Luo, S., Miao, Z., Liu, J.*, Song, J., Xi, W., & Liu, C. (2021). Effects of Coolants of Double Layer Transpiration Cooling System in the Leading Edge of a Hypersonic Vehicle. Frontiers in Energy Research, 530.

3.     Jian Liu, Mengyao Xu, Xi Wenxiong, Jiawen Song, Shibin Luo, Bengt Ake Sunden. (2021). Numerical investigations of endwall film cooling design of a turbine vane using four-holes pattern, International Journal of Numerical Methods for Heat & Fluid Flow. https://www.emerald.com/insight/0961-5539.htm.

4.     J. Liu, W. Du, S. Hussain, G. Xie, B. Sundén, Improvement of Film Cooling Effectiveness Upstream of the Leading Edge of a Turbine Vane, Numerical Heat Transfer, Part A, 2021, https://doi.org/10.1080/10407782.2020.1835110 .

5.     J. Liu, S. Hussain, W. Wang, G. Xie, B. Sundén, Experimental and Numerical Investigations of Heat Transfer and Turbulent Flow in a Rectangular Channel Mounted with Perforated Ribs,  International communications in Heat Mass Transfer, 121 (2021) Paper No. 105083.

6.     J. Liu, S. Hussain, W. Du, L. Wang, G. Xie, B. Sundén, Design of Full-scale Endwall Film Cooling of a Turbine Vane, ASME J. Heat Transfer 142 (2020) 022201.

7.     J. Liu, S. Hussain, W. Wang, L. Wang, G. Xie, B. Sundén, Effect of the Relative Location of a Pocket Cavity on Heat Transfer and Flow Structures of the Downstream Endwall with a Symmetrical Vane, International Journal of Thermal Sciences 145 (2019) 106012. 

8.     J. Liu, S. Hussain, W. Wang, L. Wang, G. Xie, B. Sundén, Heat Transfer Enhancement and Turbulent Flow in a Rectangular Channel Using Perforated Ribs with Inclined Holes, ASME Journal of Heat Transfer 141 (2019) paper No. 041702.

9.     J. Liu, S. Hussain, L. Wang, G. Xie, B. Sundén, Effects of a Pocket Cavity on Heat Transfer and Flow Characteristics of the Endwall with a Bluff Body in a Gas Turbine Engine, Applied Thermal Engineering 143 (2018) 935-946. 

10.  J. Liu, S. Hussain, C. Wang, L. Wang, G. Xie, B. Sundén, Effects of the Pocket Cavity on Heat Transfer and Fluid Flow of the Downstream Outlet Guide Vane at Different Flow Attacking Angles, Numerical Heat Transfer, Part A: Applications 74 (2018) 1087-1104. 

11.  J. Liu, S. Hussain, J. Wang, L. Wang, G. Xie, B. Sundén, Application of Fractal Theory in the Arrangement of Truncated Ribs in a Rectangular Cooling Channel (4:1) of a Turbine Blade, Applied Thermal Engineering 139 (2018) 488-505. 

12.  J. Liu, S. Hussain, J. Wang, L. Wang, G. Xie, B. Sundén, Heat transfer enhancement and turbulent flow in a high aspect ratio channel (4: 1) with ribs of various truncation types and arrangements, International Journal of Thermal Sciences 123 (2018) 99-116. (IF = 3.488, ESI高倍引论文)

13.  J. Liu, G.N. Xie, B. Sunden, Flow pattern and heat transfer past two tandem arranged cylinders with oscillating inlet velocity, Applied Thermal Engineering 120 (2017) 614-625.

14.  J. Liu, S. Hussain, L. Wang, G. Xie, B. Sundén, Heat transfer and turbulent flow characteristics over pocket cavity in the junction part of an outlet guide vane in a gas turbine, Applied Thermal Engineering 124 (2017) 831-843. (IF = 4.026)

15.  J. Liu, G. Xie, B.A. Sunden, L. Wang, M. Andersson, Enhancement of heat transfer in a square channel by roughened surfaces in rib-elements and turbulent flow manipulation, International Journal of Numerical Methods for Heat & Fluid Flow 27 (2017) 1571-1595. (IF = 1.958)

16.  J. Liu, G. Xie, T.W. Simon, Turbulent flow and heat transfer enhancement in rectangular channels with novel cylindrical grooves, International Journal of Heat and Mass Transfer 81 (2015) 563-577. (IF = 4.346)

17.  J. Liu, Y. Song, G. Xie, B. Sunden, Numerical modeling flow and heat transfer in dimpled cooling channels with secondary hemispherical protrusions, Energy 79 (2015) 1-19. (IF = 5.537)

18.  J. Liu, S. Hussain, L. Wang, G. Xie, B. Sundén, Effects of the location of the pocket cavity on heat transfer and flow characteristics of the endwall with a symmetrical vane, Proceedings of ASME Turbo Expo 2018: Turbomachinery Technical Conference and Exposition, GT2018. (EI)

19.  J. Liu, S. Hussain, L. Wang, G. Xie, B. Sundén, Investigation of heat transfer and fluid flow in fractal truncated ribbed channels for the internal cooling of turbine blades, The 16th International Heat Transfer Conference Chinese National Convention Center, Beijing, China, August 10-15, 2018.(传热权威会议)

20.  J. Liu, S. Hussain, L. Wang, G. Xie, B. Sundén, H. Abrahamsson, C. Arroyo, The Effect of the Pocket on the Heat Transfer of Endwall With Bluff Body in the Rear Part of Gas Turbine,  ASME Turbo Expo 2017: Turbomachinery Technical Conference and Exposition, American Society of Mechanical Engineers, 2017, pp. V05AT11A001-V005AT011A001. (EI)

21.  J. Liu, C. Wang, L. Wang, G. Xie, M. Andersson, B. Sundén, H. Abrahamsson, C. Arroyo, Investigation of Heat Transfer and Fluid Flow Over Pocket Cavity in the Rear Part of Gas Turbine,  ASME 2016 International Mechanical Engineering Congress and Exposition, American Society of Mechanical Engineers, 2016, pp. V008T010A038-V008T010A038. (EI)



  • Associate Professor

    Supervisor of Master's Candidates
  • Date of Employment:2020-05-14
  • School/Department:航空航天学院
  • Education Level:With Certificate of Graduation for Doctorate Study
  • Business Address:中南大学本部升华楼后楼602
  • Sex:Male
  • Contact Information:jian.liu@csu.edu.cn
  • Degree:Doctoral Degree in Engineering
  • Discipline:Power Engineering and Engineering Thermal Physics
    Aerospace Science and Technology
Central South University  All rights reserved  湘ICP备05005659号-1 Click:
  MOBILE Version

The Last Update Time:..