- [21]Ruohan Tan, Peijun Ni, Shu Cheng, Xiongbing Li, Yongfeng Song.Effective Elastic Stiffness Tensor and Ultrasonic Velocities for 3D Printed Polycrystals with Pores and Texture.Research in Nondestructive Evaluation, 2022
- [22]Shan Li, Xiongbing Li, Yongfeng Song.Attenuation and dispersion of leaky Rayleigh wave in polycrystals.The Journal of the Acoustical Society of America, 152: 3271(2022).
- [23]G. Zhang, X. Li, T. Kundu, S. Zhang.Sideband peak count-index technique for monitoring multiple cracks in plate structures using ordinary state-based peri-ultrasound theory.The Journal of the Acoustical Society of America, 2022, 152 (5) : 3035-3048.
- [24]Lida Yu, Yongfeng Song, Xiongbing Li.Ultrasonic pseudo-color imaging in strongly attenuating materials with Filtered-Delay Multiply And Sum nonlinear beamforming.NDT & E International, 2022, 130: 102660.
- [25]Feng Chen, Xiongbing Li, Yongfeng Song, Siqi Chen.Evaluating elongated grains with diffuse ultrasonic double scattering and rectangular transducers.Journal of the Acoustical Society of America, 2022, 151 (1) : 517-528.
- [26]Zixin Guo, Yongfeng Song, Xiongbing Li.Numerical analysis of ultrasonic wave propagation and scattering in oligo-crystalline materials.Wave Motion, 2022
- [27]Liang Qin, Xiongbing Li, Yongfeng Song, Shuzeng Zhang.3D ultrasonic imaging based on synthetic aperture focusing technique and space-dependent threshold for detecting submillimetre flaws in strongly scattering metallic materials.NDT & E International, 2021, 124: 102523.
- [28]Duo Lyu, Shuzeng Zhang, Rongfan Zhang, Xiongbing Li.Ultrasonic measurement model-based non-destructive detection method for curved components using an immersion spherically focused transducer.Nondestructive Testing and Evaluation, 2021
- [29]张书增, 郑慧峰, 李雄兵.反射法测量固体材料的非线性系数研究.机械工程学报, 2016, 52 (16) : 8-14.
- [30]李雄兵, 陈峰, 张书增.多元高斯声束衍射修正下液体非线性系数检测方法.声学学报, 2016, 41 (4) : 515-520.
- [31]张晨昕, 李雄兵, 刘锋, 宋永锋, 刘希玲.考虑水声距的晶粒尺寸超声衰减评价模型.中南大学学报, 2016, 47 (4) : 1151-1157.
- [32]王家斌, 李雄兵, 宋永锋, 李劭晨, 王炫润.含孤岛型腔铣削加工的螺旋刀轨生成算法.航空学报, 2016, 37 (5) : 1689-1695.
- [33]李雄兵, 倪培君, 胡宏伟, 宋永锋.基于衰减速率的晶粒尺寸超声评价方法.机械工程学报, 2015, 51 (14) : 1-7.
- [34]刘希玲, 倪培君, 李雄兵, 吕铎.基于超声测量模型的镁合金弹壳自动检测方法.湖南大学学报, 2015, 42 (10) : 54-58.
- [35]戴万林, 乔日东, 倪培君, 李雄兵, 杨岳.镁合金壳体内部缺陷的精确超声定量方法.中国有色金属学报, 2015, 25 (10) : 2666-2671.
- [36]张书增, 宋永锋, 胡宏伟, 杨岳, 李雄兵.钢轨轨头内多元高斯声场模拟及其缺陷响应.铁道学报, 2014, 36 (1) : 76-80.
- [37]张杨, 郑慧锋, 李雄兵, 杨辰龙, 周晓军.变厚度曲面构件超声检测灵敏度补偿.浙江大学学报, 2013, 47 (1) : 116-121.
- [38]胡宏伟, 童林军, 倪培君, 杨岳, 李雄兵.CFRP复杂型面构件的孔隙率超声检测方法.中南大学学报, 2012, 43 (4) : 1315-1319.
- [39]张杨, 杨辰龙, 李雄兵, 郑慧峰, 周晓军.基于模板的大型复杂曲面超声C扫方法.仪器仪表学报, 2012, 33 (7) : 1626-1633.
- [40]张杨, 牛彦牧, 陈汝蒋, 李雄兵, 杨辰龙, 周晓军.基于声束追踪的变厚度曲面工件超声探头位姿规划.农业机械学报, 2012, 43 (9) : 230-234.