唐磊，男，湖南邵阳人，1992年10月生，博士，中南大学材料科学与工程学院特聘副教授。

2018年10月至2022年2月于英国伯明翰大学冶金与材料学院攻读博士学位。目前主要从事高强韧铝合金、高强钢以及高熵合金的成分、加工工艺设计及强化机理探索等研究工作。负责国家自然科学基金青年项目1项目，在Acta Materialia, Scripta Materialia, Journal of Materials Science and Technology, Materials Science and Engineering: A等国内外重要学术期刊发表学术论文20余篇。

论文发表

[1] L. Tang, L. Wang, M. Wang, H. Liu, S. Kabra, Y. Chiu, B. Cai, Synergistic deformation pathways in a TWIP steel at cryogenic temperatures: In situ neutron diffraction, Acta Mater. 200 (2020) 943–958. https://doi.org/10.1016/j.actamat.2020.09.075.

[2] L. Tang, K. Yan, B. Cai, Y. Wang, B. Liu, S. Kabra, M.M. Attallah, Y. Liu, Deformation mechanisms of FeCoCrNiMo0.2 high entropy alloy at 77 and 15 K, Scr. Mater. 178 (2020) 166–170. https://doi.org/10.1016/j.scriptamat.2019.11.026.

[3] L. Tang, G. Xu, Y. Deng, H. Gan, A. Ma, Z. Yin, Mechanical Properties and Microstructure of an Al-Zn-Mg-Sc-Zr Alloy Processed by Warm Equal Channel Angular Pressing and Subsequent Aging, JOM. 70 (2018) 2684–2691. https://doi.org/10.1007/s11837-017-2616-z.

[4] L. Tang, X. Peng, J. Huang, A. Ma, Y. Deng, G. Xu, Microstructure and mechanical properties of severely deformed Al-Mg-Sc-Zr alloy and their evolution during annealing, Mater. Sci. Eng. A. 754 (2019) 295–308. https://doi.org/10.1016/j.msea.2018.12.063.

[5] L. Tang, F. Jiang, H. Liu, S. Kabra, B. Cai, In situ neutron diffraction reveals the effect of Cu micro-alloying on low-temperature tensile properties of TWIP steels, Mater. Sci. Eng. A. 845 (2022) 143211. https://doi.org/10.1016/j.msea.2022.143211.

[6] L. Tang, O. V. Magdysyuk, F. Jiang, Y. Wang, A. Evans, S. Kabra, B. Cai, Mechanical performance and deformation mechanisms at cryogenic temperatures of 316L stainless steel processed by laser powder bed fusion: In situ neutron diffraction, Scr. Mater. 218 (2022) 114806. https://doi.org/10.1016/j.scriptamat.2022.114806.

[7] L. TANG, X. PENG, F. JIANG, Y. LI, G. XU, Strong and ductile Al–Zn–Mg–Zr alloy obtained by equal angular pressing and subsequent aging, Trans. Nonferrous Met. Soc. China. 32 (2022) 1428–1441. https://doi.org/10.1016/S1003-6326(22)65884-9.

[8] L. Tang, F.Q. Jiang, J.S. Wróbel, B. Liu, S. Kabra, R.X. Duan, J.H. Luan, Z.B. Jiao, M.M. Attallah, D. Nguyen-Manh, B. Cai, In situ neutron diffraction unravels deformation mechanisms of a strong and ductile FeCrNi medium entropy alloy, J. Mater. Sci. Technol. 116 (2022) 103–120. https://doi.org/10.1016/j.jmst.2021.10.034.

[9] Y. Duan, L. Tang, G. Xu, Y. Deng, Z. Yin, Microstructure and mechanical properties of 7005 aluminum alloy processed by room temperature ECAP and subsequent annealing, J. Alloys Compd. 664 (2016) 518–529. https://doi.org/10.1016/j.jallcom.2016.01.022.

[10] F. Jiang, L. Tang, S. Li, H. Ye, M. Attallah, Z. Yang, Achieving strength-ductility balance in a laser powder bed fusion fabricated TiB2/Al–Cu-Mg-Ag alloy, J. Alloys Compd. 945, (2023), 169311, https://doi.org/10.1016/j.jallcom.2023.169311

欢迎各位同学报考研究生！

联系方式

[1]  邮编： 410083

[2]  通讯/办公地址： School of Materials Science and Engineering, Central South University, Changsha, P.R.China

[3]  邮箱：lei.tang@csu.edu.cn