李洲

特聘副教授

特聘副教授

电子邮箱:

入职时间:2021-01-15

所在单位:机电工程学院

学历:博士研究生毕业

办公地点:中南大学机电工程学院C206

在职信息:在职

移动电话:

邮箱:

个人简介

李洲,博士,特聘副教授,澳大利亚University of Wollongong优秀博士论文获得者。

目前主要从事金属复合材料和先进成形技术、汽车车身轻量化设计制造、新能源纯电动汽车驱动系统一体化等研究工作。在工程领域国内或国际权威期刊 International Journal of Mechanical Sciences 、Materials Science and Engineering: A 等上发表近10篇高水平论文,多次参加领域内主流国际会议并作主题报告,受邀为一些国际期刊审稿人,并指导海外1名本科生和3名硕士研究生毕业。

具有多年大型国企汽车设计和项目研发的工程经验,主持和参与了五项新能源电动特种环保车辆的研发,及两款新型电动乘用车驱动系统产品的开发,获10余项专利授权。


科研成果

·       期刊文章 (5SCI一作7)

[1]     Li, Z., Zhao, J., Jia, F., Liang, X., Zhang, Q., Yuan X., Jiao, S., and Jiang, Z (2020) Interfacial characteristics and mechanical properties of duplex stainless steel bimetal composite by heat treatment. Materials Science and Engineering: A. 787:139513. (JCR Q1, IF: 4.652)

[2]     Li, Z., Zhao, J., Jia, F., Lu, Y., Zhang, Q., Jiao, S., and Jiang, Z. (2020) Analysis of flow behaviour and strain partitioning mechanism of bimetal composite under hot tensile conditions. International Journal of Mechanical Sciences 169:105317. (JCR Q1, IF: 4.631)

[3]     Li, Z., Zhao, J., Jia, F., Liang, X., Yuan X., Jiao, S., Zhou, C., and Jiang, Z (2020) Hot deformation behaviour and interfacial characteristics of bimetal composite at elevated temperatures. Intermetallics 125:106893. (JCR Q1, IF: 3.398)

[4]     Li, Z., Zhao, J., Jia, F., Liang, X., Yuan X., Jiao, S., and Jiang, Z (2020) Study on deformation characteristics and microstructure evolution of 2205/AH36 bimetal composite in a novel hot forming process. Metals 10(10), 1375. (JCR Q1, IF: 2.117)

[5]     Li, Z., Zhao, J., Jia, F., Zhang, Q., Liang, X., Jiao, S., and Jiang, Z. (2018) Analysis of bending characteristics of bimetal steel composite. International Journal of Mechanical Sciences 148:272-283. (JCR Q1, IF: 4.631)

[6]     Li, Z., Zhao, J., Jia, F., Zhang, Q., Liang, X., Jiao, S., and Jiang, Z. (2019) Numerical and experimental investigation on the forming behaviour of stainless/carbon steel bimetal composite. International Journal of Advanced Manufacturing Technology 101: 1075-1083. (JCR Q2, IF: 2.633)

[7]     Li, Z., Zhao, J., Wu, H., Jia, F., Yao, Y., Zhang, Q., Jiao, S., and Jiang, Z. (2019) Experimental investigation on the mechanical and tribological coupled behaviour of bimetal composite under different states. Surface Topography: Metrology and Properties 7: 1-14. (JCR Q2, IF: 2.439)

[8]     Huo, M., Zhao, J., Xie, H., Li, Z., Li, S., Zhang, H., Jiang, Z. (2019) Analysis of surface roughness alteration in micro flexible rolling. Wear 426-427:1286-1295. (JCR Q1, IF: 2.950)

[9]   Wu, H., Li, Y., Lu, Y., Li, Z., Cheng, X., Hasan, M., Zhang, H., Jiang, Z. (2019) Influences of load and microstructure on tribocorrosion behaviour of high strength hull steel in saline solution. Tribology Letters 67:1-12. (JCR Q2, IF: 2.235)

[10]   李洲, 杨旭静 (2012) 有限元分析中的网格变量映射方法及应用, 汽车工程, 34 (11), 1049-1053. (EI, 中文核心期刊)

·       会议文章 (近5年作4次国际大会报告)

[1]     Li, Z., Zhao, J., Liu, G., Wu, H., Jia, F., Zhang, Q., Jiao, S., and Jiang, Z. “Effect of microstructure evolution on tribological performance of duplex stainless steel of bimetal composite in the NaCl solution” The 22nd International Symposium on Advances in Abrasive Technology, ShenZhen, China, 2019. (Conference presentation)

[2]     Li, Z., Zhao, J., Zhang, Q., Jiao, S., and Jiang, Z. “Influence of annealing on the coupled mechanical and tribological behaviour of bimetal composite” The 7th Baosteel-Australia Joint Research and Development center Annual Conference, Cairn, Australia, 2019. (Conference presentation)

[3]     Li, Z., Zhao, J., Zhang, Q., Jiao, S., and Jiang, Z. “Numerical investigation on the forming behavior of stainless/carbon steel bimetal composite” The 3rd International Conference on Precision Machinery and Manufacturing Technology, Auckland, New Zealand, 2018. (Conference presentation)

[4]     Li, Z., Zhao, J., Zhang, Q., Jiao, S., and Jiang, Z. “Numerical study on the forming behaviour of stainless/carbon steel bimetal composite” The 6th Baosteel-Australia Joint Research and Development center Annual Conference, Wollongong, Australia, 2018. (Conference presentation)

·       授权专利 

[1]    电动环卫车底盘及应用其的电动环卫车(CN201310398441.7-蒋亚萍 肖庆麟 李洲 等(发明专利)

[2]    电动清洁车(CN201310369558.2-蒋亚萍 李洲 高新桂 等(发明专利)

[3]    一种电动滚筒同步输送装置CN201610362788.X-刘祥环 李洲 胡如现 等(发明专利)

[4]    一种用于汽车变速器下线加载试验的快速连接装置CN201610262018.8-刘祥环 李洲 胡如现 等(发明专利)

[5]    电机动力输出结构及应用其的电动汽车(CN201320547095.X-瞿球雄 蒋亚萍 李洲 (实用新型专利)

[6]    电机安装支架及应用其的电动汽车(CN201320548136.7-瞿球雄 蒋亚萍 李洲(实用新型专利)

[7]    桶装垃圾运输车(CN201420001515.9)- 瞿球雄 袁峰 李洲(实用新型专利)

[8]    具有顶盖举升机构的桶装垃圾运输车(CN201320614672.2)-袁峰 李洲 瞿球雄(实用新型专利)

[9]    一种电动滚筒同步输送装置CN201620501078.6-刘祥环 李洲 胡如现 等(实用新型专利)

[10] 一种用于汽车变速器下线加载试验的快速连接装置CN201620353110.0-刘祥环 李洲 胡如现 等(实用新型专利)

获奖情况

 2020 UOW Outstanding PhD Thesis-伍伦贡大学优秀博士论文

 2019第一届伍伦贡大学学生学者学术交流会 优秀奖(大会汇报人)

 2018/2019 High Degree Research Scholarship Award 伍伦贡大学高水平研究奖学金2

 2016-2019 International Postgraduate Tuition Award 伍伦贡大学国际研究生奖学金



教育经历

[1] 2005.9-2009.6
湖南大学 | 机械设计制造及其自动化 | 本科 | 学士
[2] 2009.9-2012.6
湖南大学 | 车辆工程 | 硕士研究生 | 硕士
[3] 2016.11-2020.8
University of Wollongong(澳大利亚伍伦贡大学 ) | 机械工程 | 博士研究生毕业 | 博士学位

工作经历

[1] 2012.7-2015.4
环卫研发中心-机械工程师 | 中联重科股份有限公司 
[2] 2015.11-2016.11
新能源研发部-项目经理 | 潍柴动力株洲齿轮股份有限公司 
[3] 2020.8-2020.10
Research Fellow-博士后研究员 | University of Wollongong(澳大利亚卧龙岗大学) 

团队成员

暂无内容