陈志永

教授 博士生导师 硕士生导师

入职时间:1999-08-01

所在单位:材料科学与工程学院

学历:博士研究生毕业

办公地点:湖南省长沙市岳麓区中南大学校本部化学楼205#

性别:男

联系方式:czysh@netease.com

学位:博士学位

在职信息:在职

毕业院校:中南大学

   
当前位置: 中文主页 >> 论文成果

Effects of aging temperature on microstructure, tensile and creep properties of ring rolled AZ80-Ag alloy

发布时间:2021-10-21

点击次数:

DOI码:10.1016/j.msea.2018.07.061

发表刊物:Materials Science and Engineering A

关键字:Magnesium alloy; Aging behavior; Creep performance; Dislocation

摘要:In this study, aging behavior, tensile property and creep performance of the ring rolled AZ80-Ag magnesium alloy at different aging temperatures were systematically investigated. Results show that the microstructure is mainly occupied by discontinuous precipitation (DP) and continuous precipitation (CP) of β-Mg17Al12 after T6 treatment. The peak aging at low temperature (175 °C) results in a larger volume fraction of β precipitation and a lower CP/DP ratio than peak aging at high temperature (250 °C). With raising aging temperature, the tensile strength at ambient temperature reveals a descending tendency, whereas the creep resistance at 120–175 °C under 70–90 MPa exhibits an enhancement. Based on the analysis of creep stress exponent and activation energy values, the dominant creep mechanism of both aged specimens is dislocation creep controlled by competing lattice diffusion and pipe diffusion. Basal <a> and non-basal <c + a> dislocations can be activated in the creep deformation.

合写作者:C.M. Liu, Y.C. Wan*, Y.H. Gao, S.N. Jiang, Z.Y. Chen

第一作者:G. Zeng

文献类型:J

卷号:734

页面范围:59-66

ISSN号:0921-5093

是否译文:

发表时间:2018-07-19

上一条: Annealing-induced microstructural evolution and mechanical anisotropy improvement of the Mg-Gd-Y-Zr alloy processed by hot ring rolling

下一条: Texture evolution, deformation mechanism and mechanical properties of the hot rolled Mg-Gd-Y-Zn-Zr alloy containing LPSO phase