中文
  • 何国爱
  • Doctoral degree
  • Distinguished Associate Professor
  • Light Alloy Institute
 

Social Affiliations

  •   国家自然科学基金通讯评审人/Reviewer of National Natural Science Foundation of China
    [2]   Journal of Alloys and Compounds 审稿人/Reviewer
    [3]   Materials science & engineering: A 审稿人/Reviewer
    [4]   Materials Characterization 审稿人/Reviewer
    [5]   Materials & Design 审稿人/Reviewer
    [6]   Journal of Materials Research 审稿人/Reviewer
    [7]   中国有色金属产业技术创新战略联盟“有色智库”专家
    [8]   《材料工程》《航空材料学报》青年编委

 

Personal Information

    中南大学轻合金研究院,特聘副教授,工学博士,研究生导师。主要从事航空航天用高性能铝合金、铝锂合金、高温合金、中高熵合金的材料设计、金属构件加工与成形、工艺过程仿真与模拟、合金热塑性成形及热处理、金属多尺度显微组织超精细表征、材料性能检测与表征等研究。
主持和承担了国家重点研发计划项目、国家高技术研究发展计划(“863”计划)、国家自然科学基金等国家级项目10余项。以第一作者或通讯作者在国际知名期刊Mater. Des., J. Alloys Compd., Mater. Sci. Eng., A, Mater. Charact., J. Mater. Res. 等刊物发表SCI论文20余篇;申请发明专利10余项。担任国际重要期刊Mater. Des., J. Alloys Compd., Mater. Sci. Eng., A等的审稿人。

常年招收硕(博)士生、博士后,欢迎有志青年、研究生加入团队,共同发展。
联系邮箱:heguoai@csu.edu.cn


代表性的论文:

  1. 1. Y. Liu R. Lai C. He  K. Li Y. Yang, W. Wu, Z. Fu, S. Xu , G He*, B. Gan, C. Huang Strengthening mechanism of CrCoNi medium-entropy alloy from the partially recrystallized structure to the fully recrystallized heterogeneous structure. 2022,111795.

  2. 2. G. He, C. He, Y. Liu, C. Liu,Z. Fu, S. Xu, X., Z. Xiao, Q. Wen Uncovering Microstructure Evolution and Dynamic Softening Mechanism of Spray-Deposited AlZnMgCu Alloy Under Thermal Deformation. Metals and Materials International. 2022

  3. 3. Y. Liu, G. He*, Y. Yang, K. Li, H. Gong, B. Gan, C. Huang, Revealing the microstructural evolution and mechanism during the thermomechanical treatment of polycrystalline CrCoNi medium-entropy alloy, Journal of Alloys and Compounds. 870 (2021) 159518

  4. 4. G. He*, Kai Li, Y. Yang, Y. Liu, W. Wu, C. Huang, Effect of heat treatment on the microstructure and mechanical properties of cryogenic rolling 2195 Al–Cu–Li alloy, Materials Science and Engineering: A (2021) 141682.

  5. 5. Yang, Y., He, G.*, Liu, Y. et al. Quantitative contribution of T1 phase to the strength of Al-Cu-Li alloys. J Mater Sci (2021).

  6. 6. X. Sheng, Y. Yang, Y. Cheng, J. Li, W. Wu, Y. Liu, K. Li, Y. Zhao, G. He*, Mechanism for enhancing the corrosion resistance in a spray deposition aluminum alloy Al-8.31Zn-2.46Cu-2.07Mg-0.12Zr, J. Alloys Compd. 845 (2020) 156198.

  7. 7. X. Sheng, Y. Yang, H. Yu, W. Wu, K. Li, Y. Liu, Y. Zhao, G. He*, Hot Extrusion Enhanced Homogenization of Microstructure in a Spray Deposition Aluminum Alloy, Metals 10(2) (2020) 263.

  8. 8. He, Guoai; Zhao, Yifan; Gan, Bin; Sheng, Xiaofei; Liu, Yu; Tan, Liming. Mechanism of grain refinement in an equiatomic medium-entropy alloy CrCoNi during hot deformation. [J]: J. Alloys Compd, 2019, 815(10): 413-422.

  9. 9.  Sheng, Xiaofei; Li, Kai; Wu, Wenke; Yang, yong; Liu, Yu; Zhao, Yifan; He, Guoai*. Microstructure and Mechanical Properties of Friction Stir Welded Joint of an Aluminum Alloy Sheet 6005A-T4.[J]:METALS,2019,9(11):1-12.

  10. 10.  Tan Liming; Huang Zaiwang; Liu Feng; Wang Xin; Huang Lan; He Guoai* Zhang Yiwen; Jiang Liang, Effects of strain amount and strain rate on grainstructure of a novel high Co nickel-based polycrystalline superalloy, Materials & Design, 2017, 131: 60~68.

  11. 11. He Guoai, Tan Liming, Liu Feng, Huang Lan, Huang Zaiwang, Jiang Liang: Unraveling the formation mechanism of abnormally large grains in an advanced polycrystalline nickel base superalloy. J Alloys Compd 2017, 718:405-413.

  12. 12. He Guoai; Liu Feng; Tan Liming; Huang Lan; Huang Zaiwang*; Jiang Liang, Revealing the role of strain rate during multi-pass compression in an advanced polycrystalline nickel base superalloy, Materials characterization, 2017, 128: 123~133.

  13. 13. He Guoai; Tan Liming; Liu Feng; Huang Lan; Huang Zaiwang*; Jiang Liang, Strain Amount Dependent Grain Size and Orientation Developments during Hot Compression of a Polycrystalline Nickel Based Superalloy, Materials, 2017, 10(2): 1~10

  14. 14. He Guoai; Liu Feng; Huang Lan; Huang Zaiwang*; Jiang Liang, Controlling grain size via dynamic recrystallization in an advanced polycrystalline nickel base superalloy, Journal of Alloys and Compounds, 2017, 701: 909~919

  15. 15. He Guoai; Liu Feng; Huang Lan; Huang Zaiwang*; Jiang Liang, Microstructure evolutions and nucleation mechanisms of dynamic recrystallization of a powder metallurgy Ni-based superalloy during hot compression, Materials science & engineering: A, 2016, 677: 496~504

  16. 16. He Guoai; Liu Feng; Huang Lan* ; Jiang Liang, Hot deformation behaviors of a new hot isostatically pressed nickel based powder metallurgy superalloy, Journal of Materials Research, 2016, 31(22): 3567~3579

  17. 17. He Guoai; Liu Feng*; Huang Lan; Jiang Liang, Analysis of Forging Cracks during Hot Compression of Powder Metallurgy Nickel-Based Superalloy on Simulation and Experiment, Advanced Engineering Materials, 2016, 18(10): 1823~1832

  18. 18. He Guoai; Liu Feng*; Si Jiayong; Yang Chuan; Jiang Liang, Characterization of hot compression behavior of a new HIPed nickel-based P/M superalloy using processing maps, Materials & Design, 2015, 87: 256~265

  19. 19. Tan Liming, He Guoai, Liu Feng, Li Yunping, Jiang Liang: Effects of Temperature and Pressure of Hot Isostatic Pressing on the Grain Structure of Powder Metallurgy Superalloy. Materials 2018, 11(2): 328.

  20. 20. Ding Hanhui, He Guoai, Wang Xin, Liu Feng, Huang Lan, Jiang Liang: Effect of cooling rate on microstructure and tensile properties of powder metallurgy Ni-based superalloy. Trans Nonferr Metal Soc 2018, 28(3): 451-460.

  21. 21. Tan Liming, He Guoai, Liu Feng, Li Yunping, Nie Yan, Jiang Liang: Flow behaviors and microstructural evolutions of a novel high-Co powder metallurgy superalloy during hot working. J Mater Process Technol 2018, 262: 221-231.

  22. 22. Tan Liming, Li Yunping, He Guoai, Liu Feng, Nie Yan, Jiang Liang: Optimized hot workability of a powder metallurgy nickel-base superalloy. Mater Charact 2019, 147:340-352.

  23. 23.何国爱,丁晗晖,刘琛仄,刘 锋,黄 岚,江 . 粉末特性对镍基粉末冶金高温合金组织及热变形行为的影响[J]. 中国有色金属学报2016, 26(02): 37-40. (EI)

  24. 24.何国爱,杨 川,刘 锋,黄 岚,江 . 热挤压对粉末冶金PM-0002镍基高温合金组织及热变形行为的影响[J]. 机械工程材料2016, (04):65-70, 65-70. (EI)

  25. 25.何国爱,刘 锋,江 . 一种新型粉末镍基高温合金的热变形行为及其组织演变[C]. 第十三届高温合金年会2015, 427-430.

  26. 26. 秦子珺, 刘琛仄, , 何国爱, , , .镍基粉末高温合金原始颗粒边界形成及组织演化特征[J].中国有色金属学报, 2016, 26 (01):50-59. (EI)





  • Distinguished Associate Professor

    Supervisor of Master's Candidates
  • Date of Employment:2018-01-25
  • School/Department:Light Alloy Institute
  • Education Level:PhD Graduate
  • Business Address:中南大学校本部机械楼
  • Contact Information:heguoai@csu.edu.cn
  • Degree:Doctoral degree
  • Status:Employed
  • Discipline:Materials Science and Engineering
  • Email:
Central South University  All rights reserved  湘ICP备05005659号-1 Click:
  MOBILE Version

The Last Update Time:..