- [21]Optimization of hot-rolling parameters for a powder metallurgy Ti–47Al–2Cr–2Nb-0.2W alloy based on processing map and microstructure evolution.Journal of Materials Research and Technology, 2024
- [22]Morphology evolution of P-Ti3AlC carbides and their infuence on creep properties in a crept Ti-45Al-5Nb-0.75C alloy.Journal of Materials Research and Technology, 2024
- [23]Effect of Nb content on damping capacity of as-cast Ti-47Al-xNb-2Cr-0.2Mo alloys.Materials Letters, 2024
- [24]An investigation of the impacts of non-isothermalaging on the microstructures and corrosion ofWE43 Mg alloy.JMRT, 2023
- [25]Improvement on high-temperature tensile strength and ductility of selective electron beam melting TiAl alloys via small-strain forging.Materials Science & Engineering A, 2023
- [26]亚共晶Al-xLa-0.2Sc合金的组织、性能及断裂行为.中国有色金属学报, 2023
- [27]3D printed N-doped CoCrFeNi high entropy alloy with morethan doubled corrosion resistance in dilute sulphuric acid.npj materials degradation, 2023
- [28]In-situ observation on?liform corrosion propagation and its dependenceon Zr distribution in Mg alloy WE43.Journal of Magnesium and Alloys, 2022
- [29]stacking fault formation in perovskite Ti3AlC carbides in a TiAl based alloy during creep at 800?C.Scripta Materialia, 2022
- [30]The microstructure evolution of Al-5Ce alloy prepared by strain-induced melt activation during semi-solid isothermal treatment process.Materials Letters, 2022
- [31]Effect of aging time on discontinuous precipitates, continuous precipitates and mechanical properties of AZ80A magnesium alloy.Trans. Nonferrous Met. Soc. China, 2022
- [32]Research on microstructure and mechanical properties of 2050 Al-Li alloy during non-isothermal aging.Journal of Alloys and Compounds, 2022
- [33]Phase transformation and deformation behavior of a TiAl–Nb composite under quasi-static and dynamic loadings.Materials Science & Engineering A, 2021
- [34]Effect of non-isothermal aging on microstructure and properties of Al?5.87Zn?2.07Mg?2.42Cu alloys.Trans. Nonferrous Met. Soc. China, 2021
- [35]Effect of annealing temperature on anisotropy of mechanical properties in powder metallurgy FeCoCrNiN0.07 high-entropy alloy sheets.Materials Science & Engineering A, 2021
- [36]Static recrystallization and texture evolution of cold-rolled powder metallurgy CoCrFeNiN0.07 high-entropy alloy.Journal of Alloys and Compounds, 2021
- [37]Microstructure and elevated-temperature mechanical properties of in situTi2AlNb-reinforced TiAl-matrix composite prepared by powder metallurgy.Materials Today Communications, 2020
- [38]E?ect of di?erent aging treatment on high temperature properties of die-forged Al-5.87Zn-2.07Mg-2.42Cu alloy.Materials Characterization, 2020
- [39]Discontinuous and continuous precipitation characteristics and mechanicalproperties of a AZ80A magnesium alloy at di?erent aging temperatures.Materials Characterization, 2020
- [40]Effects of non-isothermal aging on mechanical properties, corrosionbehavior and microstructures of Al-Cu-Mg-Si alloy.Journal of Alloys and Compounds, 2019
