|
- Mitigating creep anisotropy of largely pre-deformed Al-Cu alloys by shape tailoring of dislocation sub-structures.International Journal of Plasticity, 2025, 189: 104350.
- Achieving springback-free age forming via dislocation-enhanced stress relaxation in Al alloy.Journal of Materials Science & Technology, 2025, 224: 222-238.
- Structural relevance among nano-phases along the common habit planes {111} and its implications for the design of cross-over Al alloys.Acta Materialia, 2025, 283: 12053.
- Integrating reversion ageing and forming of high-strength Al alloys: principles and theoretical basis.International Journal of Machine Tools and Manufacture, 2024, 194: 104091.
- Superposed hardening from precipitates and dislocations enhances strength-ductility balance in Al-Cu alloy.International Journal of Plasticity, 2022, 158: 103413.
- First-Principles Insights into Complex Interplays Among Nano-Phases in an Al-Cu-Li-Zr Alloy.Acta Materialia, 2022, 239: 118304.
- Making sustainable aluminum by recycling scrap: The science of "dirty" alloys.Progress in Materials Science, 2022, 128: 100947.
- Strong in-plane anisotropy of creep ageing behavior in largely pre-deformed Al-Cu alloy: experiments and constitutive modeling.International Journal of Plasticity, 2022, 152: 103245.
- Improving formability and retaining dislocation hardening of heavily cold-worked Al alloy by fast heating and fast deformation.Materials Science and Engineering: A, 2021, 819: 141455.
- Reversion of natural ageing and restoration of quick bake-hardening response in Al-Zn-Mg-Cu alloy.Journal of Materials Science & Technology, 2021, 95: 88-94.
- Initial holding time dependent warm deformation and post-ageing precipitation in an AA7075-T4 aluminum alloy.Journal of Materials Processing Technology, 2021, 294: 117111.
- Large creep formability and strength–ductility synergy enabled by engineering dislocations in aluminum alloys.International Journal of Plasticity, 2020, 134: 102774.
- Stress-relaxation ageing behavior and microstructural evolution under varying initial stresses in an Al-Cu alloy: Experiments and modeling.International Journal of Plasticity, 2020, 127: 102646.
- Revealing extra strengthening and strain hardening in heterogeneous two-phase nanostructures.International Journal of Plasticity, 2020, 126,: 102626.
- Natural-ageing-enhanced precipitation near grain boundaries in high-strength aluminum alloy.Journal of Materials Science & Technology, 2020, 46: 107-113.
- Stress-level-dependency and bimodal precipitation behaviors during creep ageing of Al-Cu alloy: Experiments and modeling.International Journal of Plasticity, 2018
- Stabilizing Al–Mg–Si–Cu alloy by precipitation nano-phase control.Materials Science & Engineering A, 2019
- Pre-strain-dependent natural ageing and its effect on subsequent artificial ageing of an Al-Cu-Li alloy.Journal of Alloys and Compounds, 2019
- The formation of a new intermediate phase and its evolution toward θ' during aging of pre-deformed Al-Cu alloys.Journal of Materials Science & Technology, 2019
- Solute Sn-induced formation of composite β′/β″ precipitates in Al-Mg-Si alloy.Scripta Materialia, 2018, 155,: 68-72.