Microstructure and mechanical anisotropy of the hot rolled Mg-8.1Al-0.7Zn-0.15Ag alloy

Release time:2021-07-12

Impact Factor:5.234

DOI number:10.1016/j.msea.2017.06.008

Journal:Materials Science and Engineering: A

Key Words:Magnesium alloy; Hot rolling; Dynamic precipitation; Dynamic recrystallization; Twinning; Anisotropy

Abstract:The microstructure and mechanical anisotropy of the hot rolled Mg-8.1Al-0.7Zn-0.15Ag (wt%) sheets were investigated. Dynamic precipitation and dynamic recrystallization (DRX) are the main features of the microstructures. Compared with the sheet rolled at 673 K, the sheet rolled at 633 K exhibits higher level of dynamic precipitates, finer grain size, more uniform microstructure and better strength. TEM observations reveal that the spherical Mg17Al12 phases which precipitate dynamically do not possess specific orientation with the matrix. Meanwhile, the migration of dynamic recrystallized (DRXed) grain boundaries is retarded by the pinning of fine particles, thereby leading to a remarkable grain refinement. DRX within the compression twins only appear in the alloy sheet rolled at 673 K and give rise to a weakened basal texture. The study on mechanical anisotropy behavior suggests that the reduced anisotropy of the sheet rolled at 633 K may ascribe to the activation of prismatic < a > slip due to the presence of Mg17Al12 phases.

Co-author:Chuming Liu, Shunong Jiang, Yi Yao

First Author:Longhui Mao

Correspondence Author:Yonghao Gao

Document Code:WOS:000406989000002

Discipline:Engineering

First-Level Discipline:Materials Science and Engineering

Document Type:J

Volume:701

Page Number:7-15

ISSN No.:0921-5093

Translation or Not:no

Date of Publication:2017-07-31

Included Journals:SCI、EI