中文

Journal Publications

[1]Yingchun Wan, Yonghao Zhao, Chuming Liu, Xueyi Guo, Zhiyong Chen, Shunong Jiang, Ningning Liang, Bo Zhang, Gang Sha, Lingling Tang, Yonghao Gao, Bei Tang.Bulk nanocrystalline high-strength magnesium alloys prepared via rotary swaging[J].Acta Materialia, 2020, 200: 274-286.
[2]Sihui Wang, Wei Wei, Zhiwei Wang, Xin Shu, Yonghao Gao, Yong Wang.Activation characterization of the Ti-Zr-V getter films deposited by magnetron sputtering[J].Applied Surface Science, 2020, 528: 147059.
[3]Sihui Wang, Wei Wei, Yonghao Gao, Haibin Pan, Yong Wang.Characterization of Ti–Zr–V thin films deposited by DC and unipolar pulsed DC magnetron sputtering[J].Vacuum, 2021, 188: 110200.
[4]Longhui Mao, Chuming Liu, Yingchun Wan, Jiansheng Wei, Yonghao Gao, Shunong Jiang, Zhiyong Chen.Influence of Heat Treatment on Microstructures and Impact Toughness of Mg-Al-Zn Alloy[J].JOM: the journal of the Minerals, Metals & Materials Society, 2019, 71 (8) : 2874-2883.
[5]Gang Zeng, Yonghao Gao, Chuming Liu, Shunong Jiang, Shilun Yu, Zhiyong Chen.Eects of T5 Treatment on Microstructure andMechanical Properties at Elevated Temperature of AZ80-Ag Alloy.Materials, 2019, 12
[6]Gang Zeng, Yingchun Wan, Chuming Liu, Yonghao Gao, Shunong Jiang, Zhiyong Chen.Effects of aging temperature on microstructure, tensile and creep properties of ring rolled AZ80-Ag alloy[J].Materials Science and Engineering: A, 2018, 734: 59-66.
[7]Yi Yao, Yonghao Gao, Chuming Liu, Shilun Yu, Shunong Jiang, Zhiyong Chen.Annealing-induced microstructural evolution and mechanical anisotropy improvement of the Mg-Gd-Y-Zr alloy processed by hot ring rolling[J].Materials Characterization, 2018, 144: 641-651.
[8]Longhui Mao, Yonghao Gao, Chuming Liu, Tao Chen, Shunong Jiang, Renke Wang.Twinning behavior in a rolled Mg-Al-Zn alloy under dynamic impact loading[J].Scripta Materialia, 2018, 150: 87-91.
[9]Yingchun Wan, Yonghao Gao, chuming Liu, Hongchao Xiao, Shunong Jiang, Zhiyong Chen.Improving the Ductility of Mg–Gd–Y–Zr Alloy through Extrusion and a Following Rolling[J].Advanced Engineering Materials, 2018, 20 (6) : 1701041.
[10]Li Cao, Yonghao Gao, Chuming Liu, Shunong Jiang, Yunfeng Liu.Influence of finish rolling temperature on the microstructure and mechanical properties of Mg-8.5Al-0.5Zn-0.2Mn-0.15Ag alloy sheets[J].Materials Characterization, 2018, 139: 38-48.
[11]Yingchun Wan, Yonghao Gao, Shiyuan Xu, Chuming Liu, Shunong Jiang, Zhiyong Chen.Enhanced strength and corrosion resistance of Mg-Gd-Y-Zr alloy with ultrafine grains[J].Materials Letters, 2018, 213: 274-277.
[12]XiaoJie Zhou, Yonghao Gao, Chuming Liu, Shunong Jiang, Wenhui Liu, Liwei Lu.Microstructure and mechanical properties of extruded Mg-Gd-Y-Zn-Zr alloys filled with intragranular LPSO phases[J].Materials Characterization, 2018, 135: 76-83.
[13]Xiaojie Zhou, Yonghao Gao, Chuming Liu, Shunong Jiang, Wenhui Liu, Liwei Lu.Hot compression behavior of the Mg-Gd-Y-Zn-Zr alloy filled with intragranular long-period stacking ordered phases[J].Journal Of Alloys And Compounds, 2017, 724: 528-536.
[14]Shilun Yu, Yonghao Gao, Chuming Liu, Shunong Jiang, Zhangqi Bao.Dynamic recrystallization mechanism of Mg-8.5Gd-2.5Y-0.4Zr alloy during hot ring rolling[J].Materials Characterization, 2017, 131: 135-139.
[15]Bizheng Wang, Yonghao Gao, Chuming Liu, Shunong Jiang, Zhiyong Chen, Zhen Luo.Microstructure evolution and mechanical properties of Mg-Gd-Y-Ag-Zr alloy fabricated by multidirectional forging and ageing treatment[J].Materials Science and Engineering: A, 2017, 702: 22-28.
[16]Yong Guan, Yonghao Gao, Chuming Liu, Daibo Zhu, Tan Han.Effect of annealing on microstructure and tensile properties of cold-rolled Cu-2.7Be sheets[J].MATERIALS CHARACTERIZATION, 2017, 129: 156-162.
[17]Longhui Mao, Yonghao Gao, Chuming Liu, Shunong Jiang, Yi Yao.Microstructure and mechanical anisotropy of the hot rolled Mg-8.1Al-0.7Zn-0.15Ag alloy[J].Materials Science and Engineering: A, 2017, 701: 7-15.
[18]Yonghao Gao, Shunong Jiang, Daibo Zhu, Huaitao Gao.Theoretical analysis of a piezoelectric ceramic tube polarized tangentially for hydraulic vibration energy harvesting[J].Archive of Applied Mechanics, 2017, 87 (4) : 607-615.
[19]Shilun Yu, Yonghao Gao, Chuming Liu, Shunong Jiang.Microstructure, texture and mechanical properties of Mg-Gd-Y-Zr alloy annular forging processed by hot ring rolling[J].Materials Science and Engineering: A, 2017, 689: 40-47.
[20]Gang Zeng, Yonghao Gao, Chuming Liu, Hongchao Xiao.Microstructure and mechanical properties of AZ80-Ag alloy processed by hot ring rolling[J].Materials Science and Engineering: A, 2016, 674 (491-497)

total28 1/2

firstpreviousnext last Page

高永浩

Postal Address:
Mobile:
Email:

Central South University All rights reserved 湘ICP备05005659号-1

Click:

The Last Update Time:..