- [1]B. Liu, Y.P. Li, H. Matsumoto, Y.B. Liu, Y. Liu, A. Chiba*, Thermomechanical characterization of P/M Ti-Fe-Mo-Y alloy with a fine lamellar microstructure, Materials Science and Engineering A, 2011, 528: 2345-2352.
- [2]B. Liu, Y. Li, H. Matsumoto, Y. Koizumi, Y. Liu, A. Chiba*, Enhanced grain refinement through deformation induced α precipitation in hot working of α+ β titanium alloy, Advanced Engineering Materials, 2012, 14: 785-789.
- [3]Yuankui Cao, F. Zeng, J. Lu, B. Liu*, Y. Liu, Y. Li, In Situ Synthesis of TiB/Ti6Al4V Composites Reinforced with Nano TiB through SPS, Materials Transactions, 2015, 56: 259-263.
- [4]B. Liu*, Y. Liu, C. Qiu, C. Zhou, J. Li, H. Li, Y. He, Design of low-cost titanium aluminide intermetallics, Journal of Alloys and Compounds, 2015, 640: 298-304.
- [5]B. Liu*, Y. Liu, L. Huang, H. Li, Y. He, Characterization of phase transformation during hot compressive deformation in a β-stabilized Ti-45Al-7Nb-0.4W-0.15B alloy, Materials Characterization, 2015, 105: 113-117.
- [6]Z. Chen, B. Liu*, Y. Liu, F. Zeng, J. Lu, Microstructural evolution in a powder metallurgical Ti-7Mo alloy with continuous oxygen gradient, Journal of Central South University, 2016, 23: 508-514.
- [7]Yuankui Cao, F. Zeng, B. Liu*, Y. Liu, J. Lu, Z. Gan, H. Tang, Characterization of fatigue properties of powder metallurgy titanium alloy, Materials Science and Engineering A, 2016, 654: 418-425.
- [8]Canxu Zhou, B. Liu*, Y. Liu, K. Zhao, J. Lu, C. Qiu, J. Li, Y. He, Effects of Si on microstructures and high temperature properties of beta stabilized TiAl alloy, Materials Transactions, 2016, 57: 461-465.
- [9]Jia Li, Q. Fang, B. Liu*, Y. Liu, Y. Liu, Mechanical behaviors of AlCrFeCuNi high-entropy alloys under uniaxial tension via molecular dynamics simulation, RSC Advances, 2016, 6: 76409-76419.
- [10]Jia Li, Q. Fang, B. Liu*, Y. Liu, The effects of pore and second-phase particle on the mechanical properties of machining copper matrix from molecular dynamic simulation, Applied Surface Science, 2016, 384: 419-431.
- [11]Jia Li, B. Liu*, H. Luo, Q. Fang, Y. Liu, Y. Liu, A molecular dynamics investigation into plastic deformation mechanism of nanocrystalline copper for different nanoscratching rates, Computational Materials Science, 2016, 118: 66-76.
- [12]J. Peng, Q.H. Fang, Y.W. Liu, B. Liu*, P.H. Wen, Influence of nanoscale amorphization on emission of dislocations from a finite length crack tip in nanocrystalline materials, Engineering Fracture Mechanics, 2016, 163: 487-498.
- [13]B. Liu*, J. Wang, Y. Liu, Q. Fang, Y. Wu, S. Chen, C.T. Liu, Microstructure and mechanical properties of equimolar FeCoCrNi high entropy alloy prepared via powder extrusion, Intermetallics, 2016, 75: 25-30.
- [14]H. Feng, Q.H. Fang, B. Liu*, Y. Liu, Y.W. Liu, P.H. Wen, Nucleation and growth mechanisms of nanoscale deformation twins in hexagonal-close-packed metal magnesium, Mechanics of Materials, 2017, 109: 26-33.
- [15]Can-xu Zhou, Bin Liu*, Yong Liu, Cong-zhang Qiu, Hui-zhong Li, Yue-hui He, Effect of carbon on high temperature compressive and creep properties of β-stabilized TiAl alloy, Transactions of Nonferrous Metals Society of China, 2017, 11: 2400-2405.
- [16]J. Li, B. Liu*, Q.H. Fang, Z.W. Huang, Y.W. Liu, Atomic-scale strengthening mechanism of dislocation-obstacle interaction in silicon carbide particle-reinforced copper matrix nanocomposites, Ceramics International, 2017, 43: 3839-3846.
- [17]Tianchen Li, Y. Liu, B. Liu*, W. Guo, L. Xu, Microstructure and Wear Behavior of FeCoCrNiMo0. 2 High Entropy Coatings Prepared by Air Plasma Spray and the High Velocity Oxy-Fuel Spray Processes, Coatings, 2017, 7: 151-165.
- [18]Chunjie Xiang, Y. Liu, B. Liu*, Y. Cao, Z. Gan, Characterization of hot deformation behavior of Ti-3Al-5Mo-4.5V alloy with a martensitic starting microstructure, Journal of Micromechanics and Molecular Physics, 2017, 2: 1750011-1750024.
- [19]Jiawen Wang, Y. Liu, B. Liu*, Y. Wang, Y. Cao, T. Li, R. Zhou, Flow behavior and microstructures of powder metallurgical CrFeCoNiMo0.2 high entropy alloy during high temperature deformation, Materials Science and Engineering A, 2017, 689: 233-242.
- [20]B. Liu*, J. Wang, J. Chen, Q. Fang, Y. Liu, Ultra-High Strength TiC/Refractory High-Entropy- Alloy Composite Prepared by Powder Metallurgy, JOM, 2017, 69: 651-656