中文

Journal Publications

[1]Ti-55531近β钛合金轧板拉伸性能各向异性研究[J].钛工业进展, 2019, 36 (4) : 1-6.
[2]Ti-5A1-5Mo-5V-3Cr-1Zr近β钛合金在不同α/β界面取向条件下的针状α亚结构形成与破碎行为[J].稀有金属材料与工程, 2018, 47 (11) : 3353-3358.
[3]Ti-55531近β钛合金中针片α组织破碎的临界变形条件[J].粉末冶金材料科学与工程, 2016, 21 (5) : 665-671.
[4]Modeling and Finite Element Analysis for the Dynamic Recrystallization Behavior of Ti-5Al-5Mo-5V-3Cr-1Zr Near beta Titanium Alloy During Hot Deformation[J].HIGH TEMPERATURE MATERIALS AND PROCESSES, 2018, 37 (5) : 445-454.
[5]Controlling the microstructure and mechanical properties of a metastable beta titanium alloy by selective laser melting[J].MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2018, 726: 240-250.
[6]Additive manufacturing of fine-structured copper alloy by selective laser melting of pre-alloyed Cu-15Ni-8Sn powder[J].INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2018, 96 (9-12) : 4223-4230.
[7]Relationship between Flow Behavior and Microstructure Evolution during Isothermal Compression of near beta Titanium Alloy Ti-55531 with Acicular Starting Microstructure[J].METALS, 2018, 8 (6)
[8]Effects of strain rate on grain boundary evolution in Ti-55531 alloy[J].MATERIALS SCIENCE AND TECHNOLOGY, 2018, 34 (15) : 1880-1886.
[9]Mechanical properties and microstructure in a fine grained Ti-5Al-5Mo-5V-1Cr-1Fe titanium alloy deformed at a high strain rate[J].MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2018, 736: 202-208.
[10]Anisotropy of the Microstructure and Tensile Properties in Ti-5Al-5Mo-5V-1Cr-1Fe near beta Titanium Alloy during Hot Rolling and Heat Treatment[J].METALS, 2018, 8 (11)
[11]Mechanical Properties and Microstructure of a NiCrFeCoMn High-Entropy Alloy Deformed at High Strain Rates[J].ENTROPY, 2018, 20 (11)
[12]Effects of solution temperature and cooling rate on microstructure and micro-hardness of a hot compressed Ti-6Al-4V alloy[J].VACUUM, 2019, 159: 191-199.
[13]Effect of heat treatment on the microstructural evolution of a precipitation hardened superalloy produced by selective laser melting[J].MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2019, 748: 275-285.
[14]Twinning and its effect on the evolution of acicular alpha in Ti-5Al-5Mo-5V-3Cr-1Zr[J].MATERIALS SCIENCE AND TECHNOLOGY, 2019, 35 (7) : 839-845.
[15]Dynamic Globularization Kinetics and Finite Element Analysis for the Hot Working of Ti-5Al-5Mo-5V-3Cr-1Zr with Initial Lamellar Microstructure[J].RARE METAL MATERIALS AND ENGINEERING, 2019, 48 (4) : 1109-1115.
[16]Deformation-induced variations in microstructure evolution and mechanical properties of bi-modal Ti-55511 titanium alloy[J].JOURNAL OF ALLOYS AND COMPOUNDS, 2019, 783: 709-717.
[17]Precipitation behavior of a beta-quenched Ti-5Al-5Mo-5V-1Cr-1Fe alloy during high-temperature compression[J].MATERIALS CHARACTERIZATION, 2019, 151: 358-367.
[18]Analysis of globularization modeling and mechanisms of alpha/beta titanium alloy[J].JOURNAL OF ALLOYS AND COMPOUNDS, 2019, 788: 110-117.
[19]Comparing the evolution and deformation mechanisms of lamellar and equiaxed microstructures in near beta-Ti alloys during hot deformation[J].MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2019, 758: 71-78.
[20]Phase transformation and dynamic recrystallization behaviors in a Ti55511 titanium alloy during hot compression[J].JOURNAL OF ALLOYS AND COMPOUNDS, 2019, 795: 471-482.

total42 1/3

firstpreviousnext last Page

luners

Zip Code:
Postal Address:
Mobile:
Email:

Central South University All rights reserved 湘ICP备05005659号-1

Click:

The Last Update Time:..