Journal Publications
[1]Can Weng (翁灿), Jiangwei Li, Qianfan Tang.Application and optimization of the thin electric heater in micro-injection mold for micropillars.Nanomaterials, 2022 [2]Jiachen Chen Jin Yang Can Weng (翁灿), Self-assembled monolayers of alkanethiols on nickel insert: characterization of friction and analysis on demolding quality in microinjection molding, 2021, 12 (6) [3]Can Weng, Mingyong Zhou, Jiachen Chen, Bingyan Jiang.Experimental investigation and molecular dynamics simulation on the anti-adhesion behavior of alkanethiols on nickel insert in micro injection molding.Nanomaterials, 2021, 11 (7) [4]Can Weng*（翁灿）, Tao Ding, Mingyong Zhou, Jiezhen Liu, Hao Wang, Formation mechanism of residual stresses in micro injection molding of PMMA: A molecular dynamics simulation.Polymers, 2020, 12 (6) : 1368. [5]Can Weng（翁灿）, Jin Yang, Fei Wang, Tao Ding, Zhanyu Zhai, Thermodynamic analysis and injection molding of hierarchical superhydrophobic polypropylene surfaces.Journal of Polymer Engineering, 2020, 40 (1) : 86-97. [6]Can Weng（翁灿）, Dongjiao Yang, Mingyong Zhou, Molecular dynamics simulation on the demolding process for nanostructures with different aspect ratios in injection molding.Micromachines, 2019, 10 (10) : 636. [7]Jin Yang, Can Weng*（翁灿）, Jun Lai, Tao Ding, Hao Wang, Molecular dynamics simulation on the influences of nanostructure shape, interfacial adhesion energy, and mold insert material on the demolding process of micro-injection molding.Polymers, 2019, 11 (10) : 1573. [8]Can Weng（翁灿）, Jin Yang, Dongjiao Yang, Bingyan Jiang*.Molecular dynamics study on the deformation behaviors of nanostructures in the demolding process of micro-injection molding[J].Polymers, 2019, 11 (3) : 470. [9]Can Weng（翁灿）, Fei Wang, Mingyong Zhou, Dongjiao Yang, Bingyan Jiang*.Fabrication of hierarchical polymer surfaces with superhydrophobicity by injection molding from nature and function-oriented design[J].Applied Surface Science, 2018, 436C: 224-233. [10]Can Weng, Bingyan Jiang*, Xiang Xiong, Mingyong Zhou.Fabrication of high aspect ratio nanopillars and micro/nano combined structures with hydrophobic surface characteristics by injection molding[J].Applied Surface Science, 2018, 427A: 854-860. [11]杨冬娇, 王飞, 翁灿＊, 赖俊.超疏水表面微结构的设计及其注射成型[J].表面技术, 2018, 47 (11) : 34-40. [12]翁灿＊, 周明勇, 吕辉, 蒋炳炎, 黎醒.疏水植物表面微纳复合结构电铸模芯的制备[J].材料工程, 2018, 46 (2) : 66-72. [13]Ming-yong Zhou, Bing-yan Jiang, Can Weng*（翁灿）, Lu Zhang, Experimental study on the replication quality of micro-nano cross-shaped structure arrays in injection molding.Microsystem Technologies, 2017, 23 (4) : 983-989. [14]Bingyan JIANG, Mingyong ZHOU, Can WENG*（翁灿）, Chang-feng LI, Study on permeability of porous ultra-high molecular weight polyethylene (UHMWPE).International Polymer Processing, 2017, 32 (2) : 159-164. [15]翁灿*，杨冬娇，王飞，周宏慧, 仿箬叶聚合物表面模板法制备及润湿性能研究.农业机械学报, 2017, 48 (10) : 424-428. [16]翁灿，王飞，杨冬娇，吕辉，蒋炳炎*, 电流密度对微/纳结构电铸成型模芯质量的影响.材料工程, 2017, 45 (10) : 52-58. [17]Can Weng（翁灿）, Mingyong Zhou, Bingyan Jiang*, Hui Lv, Improvement of replication quality of electroformed nickel mold inserts with micro/nano structures.International Communications in Heat and Mass Transfer, 2016, 75: 92-99. [18]Jiang Bing-yan, Weng Can*（翁灿）, Zhou Ming-yong, Lv Hui, Drummer Dietmar, Improvement of thickness deposition uniformity in nickel electroforming for micro mold inserts.Journal of Central South University, 2016, 23 (10) : 2536-2541. [19]Mingyong Zhou, Bingyan Jiang, Can Weng*（翁灿）, Molecular dynamics study on polymer filling into nano-cavity by injection molding.Computational Materials Science, 2016, 120: 36-42. [20]Bing-yan Jiang, Ming-yong Zhou, Can Weng*（翁灿）, Lu Zhang, Hui Lv, Fabrication of nanopillar arrays by combining electroforming and injection molding.International Journal of Advanced Manufacturing Technology, 2016, 86 (5-8) : 1319-1328.
total20 1/1 first previous next last
翁灿
Postal Address:c10f646402fbd6b4abebf2bf3a2c31c50a378369908d42daed9e616dba44ff23286d20beb9d67cb3e049d09f8c148448d3f287bcf9113348fc8a298065c1030e6afac5840bd83af8c03e89902a31d9c5796ac5a06e53c4c26552a3ab8a485a1da8afcc72186b05a0d11a38fef6e996c2bcb5fffbacee81a834a3807796d29a95
Mobile:b9fac57fdb2c130cb55d95494531ee04696d9e7dd2709732732489f517f370de03fd5c4441c08c1ecde693c2b044b2dca9fa6b289e69dcc6b3ecf9a960ab5b4b2c1ddeb59e20d0c1fd038627f4517f62869cbf4e7b93fd88208f13f7405d5f95a0af86f052b3ec59b32dd6b1f6c94b504803d7b9ab23435f19a332b0784e5344
Email:7bc0551fa2b03e2cfff4432d5e71270c1d2261e4fe502d34f63fab044cbdfa136d482af8be95703024c1a4176ca3389a43d0aaed7946a3095e7b252959068ed800fcbc994225e13b6fe56d78ed1a3b56c451a7a2f00f4f8444da3cd5b942dac2569cf582b259320f330e7637a98109f757d73691353468c3681901d66d80e16d
MOBILE Version
