中文

Journal Publications

[21]S. N. Liu, J. Yang, X. Liang, Y. Y. Sun, X. J. Zhao*, Z. Y. Cai*. Investigation on the preparation, corrosion inhibition, and wear resistance of T9 and SPCC steel. Materials, 2022, 15 (22): 15227902.
[22]H. Su, L. R. Xiao, X. X. Tu, Z. Y. Cai, Z. W. Peng, Q. Zhong, S. Wang , X. J. Zhao*. Preparation and high temperature properties of Nb/Y2O3 coating on the pure Nb substrate by laser cladding. Surface and Coating Technology, 2022, 447: 128811.
[23]Y. F. Zhang, L. R. Xiao, D. L. Zeng, X. Li, X. J. Zhou, G. Zhao, W. K. He, S. Li, Y. X. Xiao, X. J. Zhao*, S. N. Liu*, Z. Y. Cai*. A novel niobium based oxidation protective coating with three lines of defense at ultra-high temperature. Corrosion Science, 2022,206: 110515.
[24]X. X. Tu, L. R. Xiao, Z. Y. Cai, Z. W. Peng, P. H. Ren, D. L. Zeng, X. J. Zhao*. Effect of vibration aging on stress relief and performance improvement of instrument-grade TiC reinforced steel matrix composite. Materials Letters, 2022, 325: 132829.
[25]L. R. Xiao, Z. W. Peng, X. J. Zhao*, Z. Y. Cai, Q. zhong, S Wang, H. L. Yu. Microstructure and mechanical properties of crack - free Ni - based GH3536 superalloy fabricated by laser solid forming. Journal of Alloys and Compounds, 2022, 921: 165950.
[26]X. X. Tu, L. R. Xiao*, X. J. Zhao*, Z. Y. Cai, Z. Y. Zhao, D. L. Zeng, S. Wang, Y. X. Xiao. Microstructure and nanoindentation creep behavior of TiC reinforced steel matrix composite after stabilizing heat treatments. Ceramics International, 2022, 48: 24733-24744.
[27]S. Li, L. R. Xiao, S. N. Liu, Y. F. Zhang, J. W. Xu, X. J. Zhou, G. Zhao, Z. Y. Cai*, X. J. Zhao*. Ultra-hightemperature oxidation resistance of a novel (Mo, Hf, W, Ti)Si2 ceramic coating with Nb interlayer on Ta substrate. Journal of the European Ceramic Society, 2022, Accepted.
[28]W. Chen, G. J. Gao, X. P. Meng, X. J. Zhao, Y. B. Jiang*, M. Wang, Z. Li, L. R. Xiao. Microstructure, properties and strengthening mechanism of Cu-TiB2-Al2O3 composite prepared by liquid phase in-situ reaction casting. Journal of Alloys and Compounds, 2022, 912: 165170.
[29]L. R. Xiao, Y. X. Xiao, X. J. Zhao*, X. Li, L. M. Chen, X. X. Tu, Y. F. Zhang, Z. Y. Cai, X. F. Wang*. Oxidation Resistance Performance of SiC-AlON Ceramic Composites at High Temperature. Processing and Application of Ceramics, 2022, accepted.
[30]Y. F. Zhang, S. N. Liu, X. J. Zhou, G Zhao, J Liu, H. T. Shen, Z. Y. Cai*, X. J. Zhao*, L R. Xiao*. Ultra-high temperature oxidation behavior of ZrB2/YSZ modified Si-Mo-W coating with a diffusion barrier on niobium alloy. Corrosion Science, 2022, 195: 109977.
[31]X. X. Chen, H. Q. Liu, M. Z. Zhou, G. Z. Fang, H. M. Zhang, Z. Y. Cai, X. J. Zhao, L. R. Xiao, S. N. Liu*, Y. Zhang. Construting stable 2×2 tunnel-structured K1.28Ti8O16@N-doped carbon nanofibers for ultralong cycling sodium-ion batteries. Electrochimica Acta, 2022, 401: 139522.
[32]刘黎明, 彭振武, 肖来荣*, 王欢, 赵小军, 蔡圳阳, 谭威. 激光成形GH3536合金的显微组织与力学性能研究. 激光与光电子学进展, 2021, 已接收.
[33]肖来荣, 苏衡, 赵小军*, 蔡圳阳*, 陈伟, 余华丽. 316L钢表面Fe-Al/Al2O3涂层的制备及其高温氧化行为研究. 中国有色金属学报, 2021, 已接收.
[34]赵小军, 梁晓, 蔡圳阳, 肖来荣*. 渗铝氧化处理对CLAM钢力学性能的影响[J]. 金属热处理, 2021, 已接收.
[35]赵小军，梁晓，蔡圳阳, 涂晓萱, 吕沛泽, 肖来荣*. CLAM钢表面铝化物涂层的制备与铅液相容性研究. 表面技术, 2021, 已接收.
[36]肖来荣, 谭威, 刘黎明, 彭振武, 赵小军*. 激光增材制造GH3536合金的低周疲劳行为. 中国激光, 2021, 48(22): 87-97.
[37]肖来荣, 谭威, 刘黎明, 王欢, 彭振武, 赵小军*. 后处理对激光成形GH3536合金组织与性能的影响. 激光与光电子学进展, 2021, 58(17): 325-333.
[38]Y. N. Sun, H. M. Xiang, F. Z. Dai, X. H. Wang, Y. Xing, X. J. Zhao*, Y. C. Zhou*. Preparation and properties of CMAS resistant high entropy cubic bixbyite structured oxides RE2O3 (RE=Sm, Eu, Er, Lu, Y and Yb): promising environmental barrier coating materials for Al2O3f/Al2O3 composites. Journal of Advanced Ceramics, 2021, 10(2): 596-613.
[39]Y. J. Chen, C. H. Xu*, S. L. Hu, X. J. Zhao*, L. R. Xiao*, Z. Y. Cai. The thermodynamic stability and mechanical properties of TiCxN1-x(0 ≤ x ≤ 1) compounds by cluster expansion method and first-principles calculations. Journal of Physics: Condensed Matter, 2021, 33(15): 155701.
[40]S. N. Liu, H. T. Shen, J. W. Xu, X. J. Zhou, J. F. Liu, Z. Y. Cai*, X. J. Zhao*, L. R. Xiao*. Preparation of a tantalum-based MoSi2-Mo coating resistant to ultra-high-temperature thermal shock by a new two-step process. Journal of Materials Science & Technology, 2021, 81: 117-122.

total86 2/5

first previous next last Page

赵小军

Zip Code:
Office Phone:
Email:

Central South University All rights reserved 湘ICP备05005659号-1

Click:

The Last Update Time:..