中文

Journal Publications

[1]L. M. Chen, Q. Z. Sun, L.R. Xiao, X. J. Zhao*, Y. F. Xu*, S. Zhang, P.Z. Lyu, S.Q. Fang. Effect of the subsolvus and supersolvus solution treatments on the basket-weave microstructure, room and high temperature properties of TC21 alloy. Materials Science & Engineering A, 2024, Accepted.
[2]X. J. Zhao, P. Z. Lyu, S. Q. Fang, S. H. Li, X. X. Tu, P. H. Ren, D. Liu, L. M. Chen, L. R. Xiao*, S. N. Liu*. Microstructure and wear behavior of Ti-xFe-SiC in-situ composite ceramic coatings on TC4 substrate by laser cladding. Materials, 2023, Accepted.
[3]Y. M. Li, X. J. Zhao, P. Y. Zhai, P. Y. Fan, J. H. Xu, Y. F. Xu, Z. K. Yu, M. Y. Li, Y. T. Zhang, D. W. Gao, S. N. Liu*, Z. Y. Cai*, L. R. Xiao*. A novel superhard, wear-resistant, and highly conductive Cu-MoSi2 coating fabricated by high-Speed laser cladding technique. Materials, 2023, Accepted.
[4]Y W Qin, H M Zhang, J H Yanghe, J Yang, W Li, X J Zhao*, S A Liu*. Vanadium nitride nanoparticles grown on carbon fiber cloth as an advanced binder-free anode for the storage of sodium and potassium ions. Materials, 2023, 16 (17): 5820.
[5]X. J. Zhao, P. Z. Lyu, S. Q. Fang, S. H. Li, X. X. Tu, P. H. Ren, D. Liu, L. M. Chen, L. R. Xiao*, S. N. Liu*. Microstructure and wear behavior of Ti-xFe-SiC in-situ composite ceramic coatings on TC4 substrate by laser cladding. Materials, 2023, Accepted.
[6]Y. M. Li, X. J. Zhao, P. Y. Zhai, P. Y. Fan, J. H. Xu, Y. F. Xu, Z. K. Yu, M. Y. Li, Y. T. Zhang, D. W. Gao, S. N. Liu*, Z. Y. Cai*, L. R. Xiao*. A novel superhard, wear-resistant, and highly conductive Cu-MoSi2 coating fabricated by high-Speed laser cladding technique. Materials, 2023, Accepted.
[7]J. W. Xu, L. R. Xiao, Y. F. Zhang, G. Z. Deng, G. Q. Liu, R. L. Wu, H. T. Shen, X. J. Zhao*, S. N. Liu*, Z. Y. Cai*. Ultra-high temperature oxidation resistance of a MoSi2 composite coating with TaB2 diffusion barrier on tantalum alloy. Corrosion Science, 2023, 224: 111563.
[8]赵小军, 姜玉祥, 翟鹏远, 李峰诚, 李艳苗, 钟琦, 蔡圳阳, 孙洋洋, 肖来荣*,刘赛男*. 铜基偏晶合金的研究进展. 中国有色金属学报, 2023, Accepted.
[9]X. X. Tu, L. R. Xiao, Z. Y. Cai, Z. W. Peng, D. L. Zeng, P. H. Ren, X. J. Zhao*. X-ray Photoelectron characterization of the chemical states and the natural oxidation behavior of TiC ceramics reinforced steel matrix composite after stabilizing heat treatments. Ceramics International, 2023, 49 (23): 37316-37329.
[10]Y. Xiong, D. Y. Jiang, Z. J. Xu, S. Gong*, J. J. Li, J. L. Guo, G. L. Xie, L. J. Peng, X. J. Zhao. Microstructure and corrosion behaviors of high-strength and high-elasticity Cu-20Ni-20Mn-xGa alloy. JOM, 2022, 74 (11): 4258-4270.
[11]Y. Xiong, H. T. Sun, Y. Y. Li, J. L. Guo, B. Liu, W. T. Qiu, X. J. Zhao, S. Gong*. Microstructure and properties of a novel Cu-20Ni-20Mn-xGa alloy with high strength, high elasticity and high plasticity. Intermetallics, 2023, 161: 107977.
[12]李艳苗, 肖来荣, 翟鹏远, 樊朋煜, 张立群, 刘雷, 张永统, 高大伟, 赵小军, 刘赛男*, 蔡圳阳*. 铜表面激光熔覆制备Ni-Cu-Mo覆层的显微组织及其摩擦磨损性能. 中国有色金属学报, 2023, 33 (5): 1502-1513.
[13]L. R. Xiao, J. W. Xu, X. J. Zhou, Y. F. Zhang, G. Z. Deng, H. T. Shen, W. Li*, X. J. Zhao, Z. Y. Cai. Orthogonal Experimental Optimization of Preparation and Microstructural Properties of a Diffusion Barrier for Tantalum-Based Silicide Coatings. Materials, 2023, 16 (11): 16114097.
[14]D. L. Zeng, L. R. Xiao, S. F. Xu, H. L.Yu, Y. Zhang, C. X. Yu, X. J. Zhao, Z. Y. Cai, W. Li*. Effect of C addition on the microstructure and fracture properties of in situ laminated Nb/Nb5Si3 composites. Materials, 2023, Accepted.
[15]L. R. Xiao, Y. X. Xiao, X. J. Zhao*, X. J. Zhou, G Zhao, Q Zhong, H. L. Yu, S. Wang, Z. W. Peng, Z. Y. Cai*. The high temperature oxidation and thermal shock behavior of a dense WSi2-TaSi2 coating on Ta substrate prepared by a novel two-step process. Ceramics International, 2023, 49 (16): 26767-26777.
[16]X. X. Tu, L. R. Xiao, Z. Y. Cai, Z. W. Peng, D. L. Zeng, P. H. Ren, X. J. Zhao*, The microstructure evolution and dimensional stability of TiC steel-bonded cemented carbide during stabilizing heat treatments. International Journal of Refractory Metals and Hard Materials, 2023, 113: 106213.
[17]L. R. Xiao, H. L. Yu, Y. W. Qin, G. Q Liu, Z. W. Peng, X. X. Tu, H. Su, Y. X. Xiao, Q. Zhong, S. Wang, Z. Y. Cai, X. J. Zhao*. Microstructure and mechanical properties of cast Al-Si-Cu-Mg-Ni-Cr alloys: Effects time and temperature of two-stage solution treatment and ageing. Materials, 2023, 16 (7): 16072675.
[18]P. H. Ren, L. R. Xiao, Z. Y. Cai, X. X. Tu, X. J. Zhao*. Effect of low- temperature aging on dimensional stability of beryllium. Rare Metal Materials and Engineering, 2023, 52 (04): 1267-1271.
[19]X. J. Zhao, Q. Zhong, P. Y. Zhai, P. Y. Fan, Y. X. Xiao, Y. X. Jiang, S. N. Liu*, W. Li*. Microstructure and wear resistance of laser cladding Ni-Cu-Mo-W-Si coatings on Cu-Cr-Zr alloys. Materials, 2023, 16 (1): 16010284.
[20]Y. X. Jiang, L. R. Xiao, P. Y. Zhai, F. C. Li, Y. M. Li, Y. F. Zhang, Q. Zhong, Z. Y. Cai*, S. N. Liu*, X. J. Zhao*. Microstructure and properties of Cu-Cr-SiC in-situ composite coating by laser cladding. Surface & Coating Technology, 2023, 456: 129264.

total86 1/5

firstpreviousnext last Page

赵小军

Zip Code:
Office Phone:
Email:

Central South University All rights reserved 湘ICP备05005659号-1

Click:

The Last Update Time:..