中文

Journal Publications

[1]Y. T. Zha, Q. Z. Sun, S. N. Liu, L. R. Xiao, X. J. Zhao, S. F. Xu, H. T. Dong, Y. L. Hou, Q. L. Yu, S. C. Xiong, Z. Y. Cai*. Study on the mechanism of pre-oxidation enhancing the high-temperature oxidation resistance of MoSi2 ceramic coating on molybdenum substrate. Journal of the European Ceramic Society, 2026, 46: 118617., 2026
[2]K. Liu, L. R. Xiao, Y. Zhang, Z. W. Peng, Y. X. Jiang, Y. Liang, S. Y. Tang, W. Li*, X. J. Zhao*. Facile room-temperature preparation of multifunctional superhydrophobic coatings based on basalt/TiO2 reinforced fluorocarbon varnish. Surfaces Interfaces, 2026, 94: 109406., 2026
[3]X. J. Zhao, J. R. Li, L. R. Xiao, Y. X. Jiang, Z. W. Peng, H. T. Dong, R. C. An, W. Li*, Z. Y. Cai*. Oxidation behavior of PVD-TiAlSiN coating on silicon nitride ceramic. Ceramics International, 2026, 52: 27285-27300., 2026
[4]L. R. Xiao, H. Y. Chen, F. J. Zhang, Y. X. Jiang, S. Y. Tang, S. N. Liu, Z. Y. Cai*, X. J. Zhao*. The wear resistance of reinforced coatings fabricated by three different processes on high-density tungsten alloy. Materials, 2026, 19: 19081605., 2026
[5]L. R. Xiao, H. T. Dong, J. R. Li, S. F. Xu, Y. X. Jiang, Z. W. Peng, X. J. Zhao*, Z. Y. Cai*. Oxidation and wear behaviors of GH3039 nickel-based alloy after borochromizing. Materials, 2026, 19: 19071454., 2026
[6]L. R. Xiao, Z. M. Wang, P. Z. Lyu, H. Y. Chen, X. X. Tu, P. H. Ren, B. Yang, X. J. Zhao*, Z. Y. Cai*, Microstructure and dynamic mechanical behavior of laser-cladding Ti-xFe-SiC composite coatings on Ti6Al4V substrate. Ceramics International, 2026, 52: 14723-14734., 2026
[7]S. Y. Tang, N. B. Zhang, Z. Z. Cui*, L. M. Chen, L. R. Xiao, X. J. Zhao*, T. Q. Deng, Y. X. Jiang. Microstructure and mechanical properties of low-cost Nb521 alloy fabricated by hot isostatic pressing. Next Materials, 2026, 11: 101678., 2026
[8]P. H. Ren, L. R. Xiao, X. J. Zhao*, Z. Y. Cai. Effects of deep cryogenic treatment on microstructures, mechanical properties and dimensional stability of beryllium for inertial devices. Journal of Central South University. 2026, 33: 1487-1498., 2025
[9]Y. Zhang, L. R. Xiao, X. J. Zhao, Z. N. Bi, K. Liu, Z. W. Peng, Y. X. Jiang, J. R. Li, Y. L Hou, W. Li*. Superhydrophobic and corrosion-resistant coating on AlSi10Mg alloy via stearic acid etching and amino-modified SiO2/epoxy composite deposition. Progress in Organic Coating, 2025, 208: 109517., 2025
[10]L. R. Xiao, G. Z. Deng, X. J. Zhao*, Y. X. Jiang, H. Y. Chen, Q. L. Yu, H. T. Dong, J. R. Li, S. N. Liu, Z. Y. Cai*. Preparation and oxidation properties of tantalum-based Yb2O3 modified MoSi2 ceramic coating. Journal of the European Ceramic Society, 2025, 45: 117546., 2025
[11]Y. X. Jiang, L. R. Xiao, Z. W. Peng, M. Y. Li, J. R. Li, X. Y. Wang, G. Z. Deng, J. S. Fang, Z. Y. Cai, X. J. Zhao*, S. N. Liu*. Laser cladding of heterostructured Cu-Cr-W-SiC immiscible coatings with balanced conductivity and wear resistance. Materials and Design, 2025, 254: 114009., 2025
[12]X. J. Zhao, Z. H. Wang, L. R. Xiao, Y. T. Zha, G. Z. Deng, S. H. Shao, Z. Y. Cai*, S. N. Liu*. Corrosion-resistant and conductive coatings on 316L stainless steel bipolar plates fabricated by hot rolling. Materials, 2025, 18(6): 1831., 2025
[13]X. J. Zhao, X. Y. Wang, W. Li, K. Liu, Y. Y. Jiang, Z. W. Peng, Y. C. Zhou, Z. L. Qian, L. K. Lu, L. R. Xiao*, Z. Y. Cai*. Optical properties and thermal stability of Ag-In-Cu film on aluminum alloy substrate deposited by magnetron sputtering. Materials, 2025, 18(6): 1318., 2025
[14]P. H. Ren, L. R. Xiao, Z. W. Cai, X. J. Zhao*. Effects of thermal-cold cycling treatment on microstructure and mechanical properties of hot isostatic pressed beryllium. Vacuum, 2025, 233: 113907., 2024
[15]X. J. Zhou, L. R. Xiao, Y. T. Zha, J. W. Xu, J. S. Fang, G. Z. Deng, S. F. Xu, S. N. Liu, X. J. Zhao, Z. Y. Cai*. Study on the Oxidation Behavior of TiB2-CeO2-Modified (Nb,Mo,Cr,W)Si2 Coating on the Surface of Niobium Alloy. Materials, 2024, 17: 17215244., 2024
[16]Y. F. Zhang, L. R. Xiao, Z. Y. Cai, R. Y. Xiao, M. K. Yin, X. Li, Y. Q. Fu, X. C. Xiao, Y. X. Jiang, Z. W. Peng, S. N. Liu, X. J. Zhao*, W. Li*, M. Song*. High-performance Nb alloy featuring a hierarchical carbides configuration for elevated-temperature applications. Journal of Materials Science and Technology, 2024, 218: 263-278., 2024
[17]X. J. Zhao, S. Q. Fang, P.Z. Lyu, J. S. Fang, Y. X. Jiang, P. H. Ren, Z. W. Peng, L. M. Chen, L. R. Xiao*, S. N. Liu*. Microstructure and anti-ablation of laser cladding Ti-Zr-B-C coating on TC11 titanium alloy. Journal of Alloys and Compounds, 2024, 990: 174498., 2024
[18]X. J. Zhou, J. W. Xu, Y. T. Zha, Y. F. Zhang, G. Z. Deng, X. J. Zhao, Z. Y. Cai, S. N. Liu*, L. R. Xiao*. High temperature protection of a novel TiB2-modified (Nb,Mo,Cr)Si2 ceramic coating on Nb-based alloy. Journal of the European Ceramic Society, 2024, 44 (7), 4425-4436., 2024
[19]L. M. Chen, Q. Z. Sun, L.R. Xiao, X. J. Zhao*, Y. F. Xu*, S. Zhang, P.Z. Lyu, S.Q. Fang. Effect of the subsolvus and supersolvus solution treatments on the basket-weave microstructure, room and high temperature properties of TC21 alloy. Materials Science & Engineering A, 2024, 893: 146150., 2024
[20]赵小军, 姜玉祥, 翟鹏远, 李峰诚, 李艳苗, 钟琦, 蔡圳阳, 孙洋洋, 肖来荣*,刘赛男*. 铜基偏晶合金的研究现状. 中国有色金属学报, 2024,34 (1): 25-49., 2024

total101 1/6

firstpreviousnext last Page

赵小军

Zip Code:
Office Phone:
Email:

Central South University All rights reserved 湘ICP备05005659号-1

Click:

The Last Update Time:..