喻海良

教授 博士生导师 硕士生导师

入职时间:2016-11-22

所在单位:轻合金研究院

职务:Professor

学历:博士研究生毕业

办公地点:中南大学新校区机电工程学院A219

性别:男

联系方式:Email::yuhailiang@csu.edu.cn; yuhailiang1980@tom.com

学位:博士学位

在职信息:在职

主要任职:Academic Editor, Scientific Reports Key Reader,Metall. Mater. Trans. A Editor Member, China Mechanical Engineering

毕业院校:Northeastern University

学科:机械工程

个人简介

喻海良,中南大学轻合金研究院/机电工程学院/高性能复杂制造国家重点实验室教授(三级教授),博士生导师。自2011年9月获教授职称,先后获得中南大学升华特聘教授、国家特聘教授、湖湘高层次人才聚集工程-创新人才、中国科协海智计划特聘专家等校、省、国家级人才项目支持。2016年11月回国,组建国内第一个以金属材料深冷成形为主的科研团队,立足科学、发展技术、服务行业。

一直从事金属压力加工领域的研究,近年来专注于超低温塑性加工与高性能有色金属材料的制备(国际上最先开展深冷异步轧制研究,点击链接查看参考文献),入选World's top 2% Scientist 2022。已发表学术论文被SCOPUS检索230篇,在科学出版社出版学术专著2部、清华大学出版编著2部、Elsevier等出版英文著作2章、MPDI出版英文编著1部;获国家授权发明专利60项;作为负责人和研究骨干承担国家自然基金面上项目、澳大利亚联邦政府研究基金等项目20余项;获得中国有色金属工业科学技术奖一等奖(排第1)、中国有色金属工业科学技术奖二等奖(排第1)、教育部科技进步奖二等奖、首届NFSOC高等教育教学成果一等奖(排名2)、民营科技发展贡献奖科技创新奖一等奖(排第2)、2023年钟掘教育奖教金-优秀奖等奖励、2023湖南省留学人员创业启动支持计划项目—创新组二等奖、最佳科技创新奖。任Metal. Mater. Trans. A(美国TMS学会会刊)Key Reader、Engineering(中国工程院院刊)青年通讯专家、《中国机械工程》(中国机械工程学会会刊)、《塑性工程学报》(中国塑性工程学会会刊)、Sci. Rep.等期刊编委。担任中国有色金属学会理事、中国有色金属学会复合材料专业委员会委员、中国塑性工程学会理事、中国有色金属学会材料科学与工程学术委员会委员、 中国仿真学会CAE仿真专业委员会委员。在《光明日报》、《中国青年报》、《中国科学报》、《今日科苑》、《中国科学基金》、《科技导报》等报刊杂志发表教育评论文章50余篇,曾多次被《Nature》、《南方周末》、《凤凰周刊》等知名传媒采访报道。


关于深冷成形的相关知识,请观看本人参与中国有色金属学会-云课堂视频《深冷成形制备铝合金材料现状与未来构想(点击可链接视频)》; 同时,也可以阅读本人撰写的综述文章深冷轧制制备高性能金属材料研究进展,(喻海良,中国机械工程,2020,31:89-99)(点击可链接全文)》、《Special rolling techniques for improvement of mechanical properties of ultrafine-grained metal sheets: A reviewYu H.L., et al. Adv. Eng. Mater. 2016,18: 754-769)(点击可链接全文)》。


招生情况:
***********************************************************************************
本人承诺以培养一流人才为己任,个人不安排任何研究生、博士后做任何与学业工作无关的杂事。本人回国后指导的第一届4名全日制硕士研究生全部入选中南大学优秀毕业生(10%学生),其中刘粤入选湖南省优秀毕业生,bhatta入选中南大学十佳国际学生优秀毕业生。我的梦想就是和你一起拥有远方,我不期待每一个研究生都能做出“立竿见影”的成绩,但希望每一位研究生都受到过严谨的研究训练!!!如果你开始思考是否要加入本课题组,请阅读《保研学生如何挑选导师和学校,(喻海良,搜狐全文转载)(点击可链接全文)》、《回国三年团队建设与研究生培养感受(喻海良,科学网博客,2020-6)(点击可链接全文)》。


欢迎优秀学生提前联系报考2024年硕士研究生和2024年博士研究生,特别欢迎双一流大学本科推免生加入本课题组,欢迎随时咨询。

另外,课题组希望招收1-2名博士后研究员(待遇可谈),欢迎随时咨询。


如果你下决心加入本课题组,请阅读《一封写给研究生的公开信,(喻海良,中国科学报,2019-1-21)(点击可链接全文)》、《博士生做好四点,可以确保毕业不延期(喻海良,科学网博客,2020-8)(点击可链接全文)》、《拿到外审意见,博士生乐了,2A1B(喻海良,科学网博客,2022-5)(点击可链接全文)》。


祝贺课题组王亚飞获评湖南省优秀研究生毕业生,邢健瑞获评中南大学优秀研究生毕业生。(2024-3-5)

祝贺课题组王文帅、张昊磊、谢志宝、李翔四名博士生和郭宝红硕士生获得2024年度中南大学研究生自主探索创新项目(省级),首次有五名同学获得省级资助(2024-1-23)。

祝贺课题组王亚飞、刑健瑞、李智德、吴雨泽、宋玲玲、顾昊、石楠楠等荣获2022-2023学年中南大学优秀学生、中南大学优秀学生干部(2023-11-8)。

祝贺课题组论文入选中国机械工程学会2023年优秀科技论文(2023-10-19)。

祝贺课题组王亚飞获2022-2023学年研究生国家奖学金,李智德获博士生校长创新奖学金,邢健瑞获格林美创新实践奖。课题组连续5年有研究生获国家奖学金和校长创新奖学金。(2023-10-12)

祝贺课题组研究成果入选MMTA' Editor's Choice (2023-9-2) https://doi.org/10.1007/s11661-023-07150-5 

祝贺课题组研究成果被美国科学促进会(AAAS)进行报道(2023-8-12)https://www.eurekalert.org/news-releases/997971 

祝贺课题组杜青林顺利通过博士论文答辩、包天闻、杨世森、周岳新、谭增顺利通过硕士论文答辩(2023-6-17)。

祝贺课题组Scripta Materialia(2023, 222, 115004)入选ESI高被引论文(2023-5-16)。

祝贺课题组罗开广(省级)、宋玲玲(省级)、吴雨泽、邢建瑞、肖岳、王亚飞、唐乐千、彭鑫瑶8名学生获得2023年研究生创新项目,取得历史性突破(2023-4-29)。

祝贺课题组论文被Journal of Applied Physics选为封面论文 (2023-4-21,https://aip.scitation.org/toc/jap/133/15  )

祝贺课题组论文被工程领域Top 1学术期刊Engineering录用, https://doi.org/10.1016/j.eng.2023.01.019(2023-1-6)

祝贺课题组王琳博士学位论文获2022年中国有色金属学会优秀博士论文,宋玲玲和余飞龙硕士论文获2022年中国有色金属学会优秀硕士论文。

***********************************************************************************

教育经历

[1]   1999.9-2003.7

东北大学  |  材料成型及控制工程  |  本科  |  本科(获辽宁省高等学校优秀毕业生)

[2]   2003.9-2009.1

东北大学  |  材料加工工程  |  博士学位  |  博士研究生毕业(获校优秀博士论文培育基金、辽宁省优秀博士毕业论文)

工作经历

[1]   2023.4-至今

伍伦贡大学  |  机械、材料、机电一体化系  |  荣誉教授(Honorary Professor)

[2]   2016.11-至今

中南大学  |  机电工程学院、轻合金研究院、高性能复杂制造国家重点实验室  |  教授

[3]   2020.1-2023.2

伍伦贡大学  |  机械、材料、机电一体化系  |  荣誉首席研究员(Honorary Principal Fellow)

[4]   2017.1-2019.12

伍伦贡大学  |  机械、材料、机电一体化系  |  荣誉高级研究员(Honorary Senior Fellow)

[5]   2014.6-2016.12

伍伦贡大学  |  机械、材料、机电一体化系  |  研究员

[6]   2011.6-2014.6

伍伦贡大学  |  机械、材料、机电一体化系  |  校长基金研究员(合作导师Kiet Tieu院士,获Vice-Chancellor's Fellowship,2个URC Small Grant、校优秀青年教师培训班成员)

[7]   2009.9-2011.6

清华大学  |  机械系  |  博士后(合作导师柳百成院士,获中国博士后科学基金一等资助、特等资助、国家自然科学基金青年基金、教育部科技进步奖二等奖)

[8]   2006.4-2009.9

东北大学  |  轧制技术及连轧自动化国家重点实验室  |  助教(获教育部新教师基金、轧制国家重点实验室学术评比教师组第一名)

社会兼职

  • [1]   2023.10-至今    
    湖南省机械工程学会塑性工程分会——副理事长(联合发起人)

  • [2]   中国有色金属学会第八届理事会——理事

  • [3]   SAMPLE中国大陆总会金属基复合材料专业委员会——委员

  • [4]   中国机械工程学会塑性工程学会——理事

  • [5]   中国金属学会冶金设备分会(第八届)——委员

  • [6]   中国仿真学会CAE仿真专业委员会——委员

  • [7]   中国有色金属学会青年工作委员会——委员

  • [8]   中国有色金属学会复合材料专业委员会——委员

  • [9]   中国有色金属学会材料科学与工程学术委员会——委员

  • [10]   中国机械工程学会 高级会员

  • [11]   《“Ferrous Metallurgy”. Bulletin of scientific, technical and economic information》编委(俄罗斯期刊,创刊于1944年)

  • [12]   《塑性工程学报》(中国塑性工程学会会刊,SCOPUS数据库检索期刊) 编委

  • [13]   《Engineering》(中国工程院院刊,JCR1区)青年通讯专家,中国科技期刊卓越行动计划-领军期刊入选期刊

  • [14]   《Metallurgical and Materials Transactions A》(美国TMS学会会刊,JCR1区) Key Reader

  • [15]   《中国机械工程》(中国机械工程学会会刊,EI检索期刊) 编委

  • [16]   《Scientific Reports》(JCR1区)编委

  • [17]   《中南大学学报(英文版)》编委(SCI检索期刊,中国科技期刊卓越行动计划入选期刊,2021-2023连续三年获得期刊优秀青年编委)

  • [18]   《中国有色金属学报》&《Trans. Nonferr. Met. Soc. China》首届青年编委会委员 (中国科技期刊卓越行动计划入选期刊,有色行业T1期刊)

  • [19]   《Frontiers in Metals and Alloys》期刊副主编 (Associate Editor)

  • [20]   《International Journal of Lightweight Materials and Manufacture》期刊客座编辑“High performance of light metal manufacturing and processing”直到2022年8月30日,欢迎大家投稿。https://www.keaipublishing.com/en/journals/international-journal-of-lightweight-materials-and-manufacture/call-for-papers/light-metals/

  • [21]   《Metals》期刊客座编辑:Special Issue "Microstructure and Properties of Rolled Alloys",该专辑结束时间为2022年3月,欢迎大家投稿:https://www.mdpi.com/journal/metals/special_issues/Rolled_Alloys

  • [22]   《Materials》期刊客座编辑:Special Issue "Advances in High-Performance Non-Ferrous Materials",该专辑结束时间为2022年6月,欢迎大家投稿:https://www.mdpi.com/journal/materials/special_issues/ferrous_mater

  • [23]   2023 8th International Seminar on Advances in Materials Science and Engineering (ISAMSE 2023)国际会议大会主席http://isamse.org/

  • [24]   2023 9th International Conference on Mechanical Engineering,Materials and Automation Technology(MMEAT 2023)国际会议大会主席 http://www.mmeat.net/committeeSpeaker

团队成员

团队名称:深冷成形与极端服役性能有色金属材料创新研究团队

团队介绍:本课题组围绕超低温塑性成形及高性能有色金属材料,开展高品质科研工作,力争创新、突破现状。

高海涛

2023.04-至今 讲师(Lecturer)。本科-博士东北大学完成,2021.01-2023.04课题组博士后。研究方向为高性能层状复合带材轧制制备。获中南大学博士后B类资助,获2021年国家自然科学基金青年基金资助、2022年湖南省自然科学基金资助、2022年中国博士后科学基金面上项目二等资助、2022年中国博士后科学基金特别资助(站中)。

发表论文:

1. Gao H.T., Liu S.L., Song L.L., Kong C., Yu H.L.* Enhanced strength-ductility synergy in heterostructured copper/brass laminates via introducing cryorolling. Materials Science and Engineering A, 2023,  https://doi.org/10.1016/j.msea.2023.145239.

2. Gao H.T., Li J., Lei G., Song L.L., Kong C., Yu H.L.* High Strength and Thermal Stability of Multilayered Cu/Al Composites Fabricated through Accumulative Roll Bonding and Cryorolling. Metallurgical and Materials Transactions A, 2022, https://doi.org/10.1007/s11661-022-06610-8.

3. Gao H.T., Kong C., Yu H.L.* Lightweight metal laminates via (hot, cold and cryogenic) roll bonding: A review. Transaction of Nonferrous Metals Society of China, 2022, https://kns.cnki.net/kcms/detail/43.1239.TG.20220317.1158.032.html.

4. Gao H.T., Wang L., Liu S.L., Li J., Kong C., Yu H.L.* Effects of a stainless steel interlayer on the interfacial microstructure and bonding strength of Cu/Al clad sheets prepared via the powder-in-tube method. Journal of Materials Research and Technology, 2021, 15: 3514-3524. https://doi.org/10.1016/j.jmrt.2021.09.144.

  

吴雨泽

2019级博士生(PhD Student),中南大学直博生。研究方向为异质结构高熵合金深冷轧制制备与微观组织演变机制。获2020-2021学年中南大学优秀研究生,2021-2022学年国家奖学金、中南大学优秀研究生、2022-2023学年中南大学优秀学生。获2023年获研究生创新项目资助:铝含量对深冷异步轧制低层错能高熵合金变形机理与性能影响研究。

已经发表学术论文:

1.  Wu Y.Z., Liu S.L., Luo K.G., Kong C., Yu H.L.* Deformation mechanism and mechanical properties of a CoCrFeNi high-entropy alloy via room-temperature rolling, cryorolling, and asymmetric cryorolling. Journal of Alloys and Compounds, 2023,  https://doi.org/10.1016/j.jallcom.2023.170883.

2.    Wu Y.Z., Zhang Z.Y., Zhang Y.*, Kong C., Yu H.L.* Twinning susceptibility of CrCoNi medium entropy alloy to cryogenic temperature during asymmetric rolling. Journal of Materials Research and Technology, 2022, https://doi.org/10.1016/j.jmrt.2022.08.045.

3. Wu Y.Z., Luo K.G., Zhang Y.*, Kong C., Yu H.L.* Microstructures and mechanical properties of a CoCrFeNiMn high-entropy alloy obtained by 223 K cryorolling and subsequent annealing. Journal of Alloys and Compounds. 2022, https://doi.org/10.1016/j.jallcom.2022.166166.

4. Wu Y.Z., Zhang Z.Y., Liu J., Kong C., Wang Y., Tandon P., Pesin A., Yu H.L.* Superior strengthening effect on heterogeneous lamella structure in medium entropy alloy CrCoNi processed by asymmetrical cryorolling. Transaction of Nonferrous Metals Society of China, 2021, https://kns.cnki.net/kcms/detail/43.1239.TG.20211222.1732.030.html.

5. Wu Y.Z., Liu J., Bhatta L., Kong C., Yu H.L.* Study of texture analysis on asymmetric cryorolled and annealed CoCrNi medium entropy alloy. Crystals 2020, 10(12), 1154; https://doi.org/10.3390/cryst10121154 (Invited by Prof. Kiet Tieu

  

顾昊

2019级博士生(PhD Student),中南大学直博生。研究方向为脉冲电流处理深冷轧制制备金属材料热稳定性研究。2021年获研究生创新项目资助:基于材料素化制备高热稳定性材料及其组织调控、演变机理研究。获2021-2022学年中南大学校长创新奖学金、中南大学优秀研究生。2022-2023学年中南大学优秀学生干部。

已发表学术论文:

1. Gu H.,Bhatta L., Gao H.T.*, Li Z.D., Kong C.,Yu H.L.*  Effect of cryorolling on the microstructure and high-temperature mechanical properties of AA5083 sheets. Materials Science and Engineering A, 2022, 843: 143141   https://doi.org/10.1016/j.msea.2022.143141 (https://authors.elsevier.com/a/1ew5-3HXkRovlT)

2.  Gu H., Li Z.D., Luo K.G., Bhatta L., Xiong H.Q., Zhang Y.*, Kong C., Yu H.L.* Enhanced mechanical properties of AA5083 matrix composite via introducing Al0.5CoCrFeNi particles and cryorolling. Acta Metallurgical Sinica (English Letters), 2022, https://doi.org/10.1007/s40195-021-01351-w  (期刊封面论文)

3.   Gu H., Li Z.D., Luo K.G., Gao H.T., Kong C., Yu H.L.* Asymmetric cryorolling and subsequent low-temperature annealing to improve mechanical properties of TA2 Ti sheets. JOM, 2022, https://doi.org/10.1007/s11837-022-05551-2.


  

罗开广

2019级博士生(PhD Student),中国石油大学推免直博生。研究方向为深冷轧制制备金属材料电塑性性能研究。获2021-2022学年国家奖学金、中南大学优秀研究生、2022-2023学年中南大学优秀学生。获2023年获研究生创新项目资助:大功率脉冲电流辅助铝基复合材料变形机理研究(省级)。

已发表代表性学术论文:

1. Luo K.G., Lei G., Liu S.L., Kong C., Yu H.L.* Mechanical properties and microstructure evolution of cryorolled AlCoCrFeNi reinforced aluminum matrix composites tensile tested at room and cryogenic temperatures. Metallurgical and Materials Transactions A, 2023, https://doi.org/10.1007/s11661-023-07012-0.

2. Luo K.G., Liu S.L., Xiong H.Q., Zhang Y.*, Kong C., Yu H.L.* Mechanical properties and strengthening mechanism of aluminum matrix composites reinforced by high-entropy alloy particles. Metals and Materials International, 2022, https://doi.org/10.1007/s12540-021-01159-4.

3. Luo K.G., Xiong H.Q., Zhang Y., Gu H., Li Z.D., Kong C., Yu H.L.* AA1050 metal matrix composites reinforced by high-entropy alloy particles via stir casting and subsequent rolling. Journal of Alloys and Compounds, 2022, 893, 162370, https://doi.org/10.1016/j.jallcom.2021.162370.

4. Luo K.G., Wu Y.Z., Zhang Y., Lei G., Yu H.L. Study on mechanical properties and microstructure of FeCoCrNi/Al composites via cryorolling. Metals, 2022,  12(4), 625. https://doi.org/10.3390/met12040625.

5.  Luo K.G., Wu Y.Z., Xiong H.Q., Zhang Y.*, Kong C., Yu H.L.* Enhanced mechanical properties of aluminum matrix composites reinforced with high-entropy alloy particles via asymmetric cryorolling. Transactions of Nonferrous Metals Society of China, 2022, https://kns.cnki.net/kcms/detail/43.1239.tg.20220610.1404.004.html.


  

雷刚

2019级博士生(PhD Student),中南大学本科-硕士。研究方向为深冷环境金属材料摩擦磨损机制研究。

已发表学术论文:

1) Lei G., Xing J.R., Gao H.T., Cui X.H., Yu H.L.*, Effect of temperature on near-surface microstructure evolution in nanocrystalline metal under shear stress. Journal of Central South University, 2023, https://doi.org/10.1007/s11771-023-5462-x.

2)   Lei G., Zhang Y., Gao H.T., Cui X.H., Yu H.L.* Nano-tribological behavior of a CuCoCrFeNi high-entroppy alloy at cryogenic temperature: a molecular dynamics study. Journal of Applied Physicals, 2023, 133, 155901. https://doi.org/10.1063/5.0142135 封面论文

3)   Lei G., Gao H.T.*, Zhang Y., Cui X.H., Yu H.L.* Atomic-level insights on enhanced strength and ductility of Al-Mg-Si alloys with β²-Mg5Si6 at cryogenic temperatures. Transactions of Nonferrous Metals Society of China, 2023, https://kns.cnki.net/kcms/detail/43.1239.TG.20220830.1515.002.html.

4)雷刚, 欧阳鸿武*, 喻海良, 唐昕. 新型围限颗粒介质联轴器持续剪切下的扭矩涨落行为, 中国机械工程, 2021, https://kns.cnki.net/kcms/detail/42.1294.TH.20210330.1009.004.html 

  

贾帅广

2019级博士生(PhD Student),工程博士。研究方向为高性能稀土材料深冷轧制制备。

  

李智德

2020级博士生(PhD student),长沙理工大学本科、中南大学硕士。研究方向为异质结构材料变形机制原位分析。获中南大学2021年度研究生校长创新奖。获中南大学2020-2021学年研究生优秀学生、2022-2023学年中南大学优秀学生。获2023年研究生校长创新奖学金。

已发表和录用的学术论文:

1. Li Z.D., Zhao X., Tan Z., Kong C., Yu H.L. Microstructure and texture evolution of pure nickel during cryorolling and subsequent annealing. Journal of Materials Research and Technology, 2023, https://doi.org/10.1016/j.jmrt.2023.04.173.

2.   Li Z.D., Kong C., Yu H.L.* Abnormal grain refinement and synergistic enhancement of strength and plasticity of high-purity nickel via cycle skin-pass rolling deformation. Metallurgical and Materials Transactions A, 2023, https://doi.org/10.1007/s11661-023-07058-0.

3. Li Z.D., Gu H., Luo K.G., Kong C., Yu H.L.* Achieving High Strength and Tensile Ductility of Pure Nickel by Cryorolling with Subsequent Low-Temperature Short-Time Annealing. Engineering, 2023, https://doi.org/10.1016/j.eng.2023.01.019  

4. Li Z.D., Gu H., Kong C., Yu H.L.* Low-temperature short-time annealing induced high strength and ductility in a cryorolled pure nickel, Metallurgical and Materials Transactions A, 2022, 53pages2338–2345. https://doi.org/10.1007/s11661-022-06689-z.

5. Li Z.D., Zhang Y.*, Xiong H.Q., Kong C., Yu H.L.* Fabrication of high-entropy alloy particles reinforced AA2024 composites using casting and rolling. Materials and Manufacturing Processes, 2022, 37: 90-98. https://doi.org/10.1080/10426914.2021.1944198.

6. Li Z.D.#, Wu Y.Z.#, Xie Z.B., Kong C., Yu H.L.* Grain growth mechanism of lamellar-structure high-purity nickel via cold rolling and cryorolling during annealing. Materials, 2021, 14: 4025. https://doi.org/10.3390/ma14144025. (#并列第一作者)

  

黄玉航

2020级博士研究生(PhD student),中南大学直博生,与清华大学联合培养。研究方向金属材料制备智能控制与分析。

  

刘士磊

2020级博士研究生(PhD student),硕士东北大学毕业。研究方向为中熵合金深冷轧制制备与性能控制。

已经发表学术论文:

1.    Liu S.L., Luo K.G., Gu H., Gao H.T., Kong C., Yu H.L.* Phase reversion-induced heterogeneous structure in a ferrous medium entropy alloy via cryorolling and annealing. Scripta Materialia, 2023, 222: 115004. https://doi.org/10.1016/j.scriptamat.2022.115004.(ESI高被引论文)

  

余琪

2020级博士研究生(PhD Student) ,工程博士。研究方向为高性能铜合金制备。

  

阿锐德(Waqas Farid)

2020级博士生留学生(PhD student),研究方向为:铝基颗粒层状复合带材轧制制备

已经发表学术论文:

1. Farid W.Bah T.A., Kong C., Yu H.L.*,  A novel way to fabricate high elastic modulus and high strength of TiC reinforced aluminum matrix composite, Materials and Manufacturing Processes, 2023, DOI:10.1080/10426914.2023.2217886

2. Farid W., Wang Z.Y., Cui H.J., Kong C., Yu H.L.* Investigation on various ceramic nano-particles reinforced aluminum matrix composites via accumulative roll bonding and cryorolling. Advanced Engineering Materials, accepted at 2023-9-13.

  

郭澳华

2021级博士研究生 PhD student,中南大学直博生。研究方向为深冷环境强韧性镁合金带材开发。

  

王文帅

2021级博士研究生 PhD student,中南大学直博生。研究方向为高强高导5G用极薄铜箔开发。获2024年中南大学研究生自主探索创新项目(省级)。

  

谢志宝

2022级学博士研究生 (PhD Student) (中南大学本-博计划),研究方向:难加工铜合金深冷轧制与时效处理。获2024年中南大学研究生自主探索创新项目(省级)。

  

张昊磊

2022级博士研究生 (PhD Student) (中南大学本博计划博士生),研究方向:铝合金深冷构件成形与性能研究。获2024年中南大学研究生自主探索创新项目(省级)。

  

宋玲玲

2022级博士研究生(PhD Student),南华大学推免硕士生,2019年9月-2022年7月课题组硕士研究生。研究方向为复合轧制工艺制备铝合金复合带材。2021年获研究生创新项目资助:复合轧制与低温退火制备层状铝合金复合带材组织与性能研究(省级),硕士论文获评2022 年度NFSOC优秀硕士学位论文。2023年获研究生创新项目资助:含Nb夹层铝/铜复合板的界面强化机理及热稳定性研究(省级)。2022-2023学年中南大学优秀学生。

发表论文:

1. Song L.L., Gao H.T., Wang Z.Y., Cui H.J., Kong C., Yu H.L.* Microstructure and Mechanical Properties of AA1050/AA6061 Laminated Composites Fabricated through Three-cycle Accumulative Roll Bonding and Subsequent Cryorolling. Materials, 2024, 17(3), 577; https://doi.org/10.3390/ma17030577  (Feature paper, 免费出版)

2. Song L.L., Gao H.T., Bhatt L., Kong C., Yu H.L.* Microstructure and mechanical properties of AA1050/AA6061 multilayer composites via accumulative roll bonding and cryorolling and subsequent aging. Materials Science and Engineering A, 2023, https://doi.org/10.1016/j.msea.2023.145069.

3. Song L.L., Xie Z.B., Gao H.T.*, Kong C., Yu H.L.* Microstructure and mechanical properties of ARB-processed AA1050/AA5052 multilayer laminate sheets during cryorolling. Materials Letters2022, 307: 130998, https://doi.org/10.1016/j.matlet.2021.130998.

  

李翔

2023级博士生 (PhD Student)  ,中南大学直博生,研究方向:高熵合金异步轧制超延展性及机理。获2024年中南大学研究生自主探索创新项目(省级)。

  

谭增

2024级待招博士生,研究方向:复合板材深冷成形变形机制与构件服役性能

2023.7-2024.9 课题组科研助研

2020.9-2023.6 课题组硕士研究生(Master Student),重庆理工大学本科,研究方向深冷轧制铝合金成形性能研究

  

邢健瑞

2021级硕士研究生 (Master Student),中南大学推免生。研究方向为深冷预变形对铝合金时效处理的影响。2023年获研究生创新项目资助:深冷预处理对6016铝合金自然时效和烘烤硬化响应的影响研究;获2023年格林美创新实践奖。2022-2023学年中南大学优秀学生。获评2024中南大学优秀研究生毕业生。

已发表学术论文:

1. Xing J.R., Lei G., Wang Y.F., Bhatta L., Kong C., Yu H.L.* Effect of room-temperature pre-rolling and pre-cryorolling on natural aging and bake hardening response of an Al-Mg-Si alloy. Metallurgical and Materials Transactions A, 2023, https://doi.org/10.1007/s11661-023-07150-5 (入选 MMTA Editor's Choice)

毕业去向:香港城市大学博士生全额奖学金

  

李海琳

2021级硕士研究生 (Master Student),江南大学推免生。研究方向Al/MgLi层状复合带材轧制与性能研究。获得2022年研究生自主探索创新项目资助:基于深冷成形的铝/镁锂合金层状复合板制备。获2022-2023学年派克新材奖励金——优秀学生干部。

发表学术论文:

1) Li H.L., Guo A.H., Kong C., Yu H.L.Microstructure evolution and mechanical properties of Al/Mg-Li/Al laminate metallic composites via hot roll bonding and subsequent cryorolling. Materials Science and Engineering A, 2023, https://doi.org/10.1016/j.msea.2023.146007.

毕业去向:待公布

  

肖岳

2021级硕士研究生 (Master Student),湘潭大学推免生,研究方向深冷轧制铝锂合金腐蚀性能研究。2023年获研究生创新项目资助:铝锂合金深冷加工后耐腐蚀性能的提升机理与调控机制。

学术论文发表:

1)Xiao Y., Wang W.S., Farid W., Zhang L.H., Kong C., Yu H.L.* Mechanism of cryorolling and aging treatment to enhance corrosion properties of 2195 Al-Li alloy. Transactions of Nonferrous Metals Society of China, accepted at 2023-12-21.

毕业去向:中车青岛四方机车车辆股份有限公司

  

王亚飞

2021级硕士研究生 (Master Student),湖南师范大学推免生。研究方向铝合金材料深冷环境本构关系研究。2023年获研究生创新项目资助:深冷环境7xxx铝合金本构关系研究与建模。获2023年研究生国家奖学金。2022-2023学年中南大学优秀学生。获评2024湖南省优秀研究生毕业生称号。

已发表学术论文:

1.  Wang Y.F., Xing J.R., Zhou Y.X., Kong C., Yu H.L.* Tensile properties and a modified Johnson-Cook model for constitutive relationship of AA7075 sheets at cryogenic temperatures. Journal of Alloys and Compound, 2023, 942: 169044. DOI: https://doi.org/10.1016/j.jallcom.2023.169044

2.  Wang Y.F., Gao H.T.*, Xing J.R., Tan Z., Kong C., Yu H.L. Effect of cryorolling after pre-aging on tensile properties and microstructures of AA7075 plates. JOM, 2023, https://doi.org/10.1007/s11837-023-06102-z.

毕业去向:已被上海交通大学录取为博士研究生


  

彭新瑶

2022级硕士研究生 (Master Student) (中南大学推免生),研究方向为层状复合薄带深冷轧制。2023年获研究生创新项目资助:钛铝层状复合带材的复合轧制制备及其界面行为研究。

  

石楠楠

2022级硕士研究生 (Master Student) (上海理工大学推免生),研究方向高强铝合金深冷轧制疲劳性能与断裂机制。荣获2022-2023学年中南大学优秀学生干部。

  

郭宝红

2022级硕士研究生 (Master Student) (中国石油大学推免生),研究方向:异步轧制制备难变形材料极薄带。获2024年中南大学研究生自主探索创新项目(省级)。

  

唐乐千

2022级硕士研究生 (Master Student) (中南大学本科),研究方向:深冷轧制铝锂合金残余应力调控。2023年获研究生创新项目资助:深冷轧制与时效处理2195铝锂合金残余应力演变与调控。

  

陈达理( SAMDANE GOLAM)

2022级硕士研究生(留学生),研究方向:新能源汽车水冷板制备

  

孙聚沙

2023级硕士推免生 (Master Student),中南大学推免生,研究方向:深冷轧制铝合金性能机器学习与优化

  

程子慧

2023级硕士研究生 (Master Student),南昌大学推免生,研究方向:厚度大差异复合板轧制制备

  

余群

2023级硕士生 (Master Student),长沙理工大学推免生,研究方向:深冷轧制铝合金材料热处理再结晶行为与机理

  

团队名称:课题组学习和工作过的校友

张昀

2020.8-2022.9,博士后 。获2020年湖南省优秀博士后创新项目、2021年湖南省自然科学基金青年项目资助、2021年中国有色金属学会优秀博士论文奖。

出站去向:湖南科技大学教师 

已经发表学术论文:

1. Zhang Y.,Lei G., Luo K.G., Chen P.H., Kong C., Yu H.L.* Tribological  behavior  of high-entropy alloy particle reinforced aluminum matrix composite s and their key impacting factors. Tribology International, 2022, https://doi.org/10.1016/j.triboint.2022.107868

2. 张昀,李晓谦*,李瑞卿,喻海良. 2219铝合金火箭贮箱过渡环复杂成形过程的Al2Cu结晶相组织演变与力学性能塑性工程学报,2021,28(5):84-93. 获评中国机械工程学会2022年优秀论文

3. Zhang Y., Li X.Q., Gu H., Li R.Q., Chen P.H., Kong C., Yu H.L.* Insight of high-entropy alloy particles-reinforced 2219 al matrix composites via the ultrasonic casting technology. Materials Characterization, 2021, 182: 111548. https://doi.org/10.1016/j.matchar.2021.111548

4. Zhang Y., Luo K.G., Lei G., Yu H.L.* Interfacial characteristics and enhanced mechanical properties of Al0.5CoCrFeNi high-entropy alloy particles reinforced Al matrix composites. Metallurgical and Materials Transactions A, 2022, 53: 4161-4167https://doi.org/10.1007/s11661-022-06837-5 


  

熊汗青

2018-2022.9,在职博士后。任职长沙学院教师。

已发表代表性学术论文:

1. Xiong H.Q., Zhou Y.X., Yang P., Kong C., Yu H.L.* Effects of cryorolling, room temperature rolling and aging treatment on mechanical and corrosion properties of 7050 alloy. Mater. Sci. Eng. A, 2022, https://doi.org/10.1016/j.msea.2022.143764 .

2. Xiong H.Q., Zhou Y.X., Kong C., Yu H.L.* Effect of retrogression treatment with different heating rates on microstructure, strength and corrosion behaviors of 7050 alloy. Mater. Charact. 2022, https://doi.org/10.1016/j.matchar.2022.111819.

3. Xiong H.Q., Su L.H., Kong C., Yu H.L.* Development of high-performance of Al alloys via cryo-forming: a reviewAdv. Eng. Mater. 2021, 23: 2001533 https://doi.org/10.1002/adem.202001533.

  

汤德林

2018.10-2020.10,博士后。中南大学优秀博士后出站。任烟台万隆真空冶金股份有限公司研究中心主任

发表代表性学术论文:

1.    Tang D.L., Wang L., Li J., Wang Z.F., Kong C., Yu H.L.* Microstructure, element distribution and mechanical property of Cu9Ni6Sn alloys by conventional casting and twin-roll casting. Metallurgical and Materials Transactions A, 2020, 511469–1474. https://doi.org/10.1007/s11661-020-05668-6

2.    Tang D.L., Li J., Wang L., Wang Z.F., Kong C., Yu H.L.* Fabrication of gradient-structure CuNiBe alloy bars by laser remelting and water-cooling. Materials and Manufacturing Processes, 2020, 35(3): 337-345. https://doi.org/10.1080/10426914.2020.1726948

  

杜青林

2017.9~2023.6,2017级博士生(PhD Student),华南理工大学硕士(湖南理工大学教师,在职博士生)。研究方向为累积叠轧制备铝合金带材在深冷轧制过程中微观组织演变与性能控制

毕业去向:湖南理工大学教师

已发表学术论文:

1. Du Q.L., Gao H.T.*, Li J., Song L.L., Kong C., Yu H.L.* Plasticity anisotropy and texture of AA1060 sheets through a combination of accumulative roll-bonding and cryorolling. JOM, 2023, https://doi.org/10.1007/s11837-023-05716-7.

2. Du Q.L., Li C., Cui X.H.*, Kong C., Yu H.L.* Fabrication of ultrafine-grained AA1060 sheets by accumulative roll bonding with subsequent cryorolling. Transactions of Nonferrous Metals Society of China, 2021, 31(11):3370-3379. https://doi.org/10.1016/S1003-6326(21)65735-7

  

李璟

2018.9~2023.1,2018级博士生(PhD Student),中南大学本科、合肥工业大学硕士。研究方向为表层轧制方法制备梯度结构带材。2020年获中南大学研究生创新项目资助:含不锈钢夹层Cu/Al/Cu复合带材轧制制备与界面结构分析。

毕业去向:云南省工信厅公务员

已发表学术论文:

1. Li J., Gao H.T.*, Kong C., Yu H.L.* Insight into the bonding mechanism in Cu/Al/Cu clad sheets via introduction of thin SS304 interlayer. Journal of Materials Research and Technology, 2022, 21: 4619-4635 https://doi.org/10.1016/j.jmrt.2022.11.076 . 

1. LI J., GAO H.T.*, KONG C., TANDON P., PESIN A., YU H.L.*. Mechanical properties and thermal stability of gradient structured Zr via cyclic skin-pass cryorolling, Materials Letters, 2021, 302: 130406. https://doi.org/10.1016/j.matlet.2021.130406

  

王琳

2018.9~2022.7,博士生(PhD Student),中南大学本科-硕士。研究方向为高性能铝锂合金深冷轧制与时效处理。博士期间获2019年和2021年国家奖学金、2020年中南大学校长创新奖学金,2020-2021学年中南大学研究生优秀学生标本(全校20人),湖南省普通高等学校2022届优秀毕业生。博士论文外审成绩2A1B,博士论文获评2022 年度NFSOC优秀博士学位论文。

已发表代表性学术论文:

1. Wang L., Kong C., Yu H.L.* Mechanical property enhancement and microstructure evolution of an Al-Cu-Li alloy via rolling at different temperatures. Journal of Alloys and Compounds, 2022, 900, 163442. https://doi.org/10.1016/j.jallcom.2021.163442. (https://authors.elsevier.com/a/1eKh43IWkc3438) 2022-2-28前免费下载

2. Wang L., Du Q.L., Li C., Cui X.H., Zhao X., Yu H.L.* Enhanced mechanical properties in lamellar Cu/Al composites processed via high-temperature accumulative roll bonding. Transactions of Nonferrous Metals Society of China, 2019, 29: 1621-1630. https://doi.org/10.1016/S1003-6326(19)65069-7 (获2022年中国有色金属学报2019年度论文优秀论文奖

3.  Wang L., Liu J., Kong C., Pesin A., Zhilyaev A.P.*, Yu H.L.* Sandwich-like Cu/Al/Cu composites fabricated by cryorolling. Advanced Engineering Materials, 2020, 22: 2000122. https://doi.org/10.1002/adem.202000122. (Invited)

4. Wang L., Kong C., Tandon P., Pesin A*, Pustovoytov D., Yu H.L.* Effect of rolling temperature on the mechanical properties of an Al-Cu-Li alloy via cryorolling and ageing. Metals 202111(6), 853; https://doi.org/10.3390/met11060853. (Invited for publication with free charge

5. Wang L., Bhatta L., Xiong H.Q., Li C., Cui X.H.*, Kong C., Yu H.L.* Mechanical properties and microstructure evolution of an Al-Cu-Li alloy subjected to rolling and aging. Journal of Central South University, 2021, https://doi.org/10.1007/s11771-021-4764-0.

6. Wang L., Tang D.L., Kong C., Yu H.L.* Crack-free Cu9Ni6Sn strips via twin-roll casting and subsequent asymmetric cryorolling. Materialia, 2022, 21: 101283. https://doi.org/10.1016/j.mtla.2021.101283.

7. Wang L., Xiao Y., Kong C., Yu H.L.Mechanical properties and microstructure evolution of an Al-Cu-Li alloy via cross cryorolling. International Journal of Lightweight Materials and Manufacture, 2022, https://doi.org/10.1016/j.ijlmm.2022.05.005.

毕业去向:高校

  

杨世森

2020.9-2023.6. 2020级硕士研究生(Master student),济南大学推免本科生,研究方向为深冷轧制极薄带材残余应力释放与性能研究。2021年获研究生创新项目资助:深冷轧制材料残余应力的释放与性能研究。获评2021-2022年中南大学机电工程学院优秀研究生。

毕业去向:比亚迪(长沙)

已发表学术论文:

1)杨世森,邢健瑞,王正宇,KONG C喻海良*. 7075铝合金深冷轧制及时效处理微观组织和性能.中国有色金属学报,录用,2023-4-26(中南大学认定A类学术期刊=JCR1区)

2) Yang S.S., Li Z.D.,Y.X. Zhou, Z. Tan, Kong C., Yu H.L.* Edge-crack free and high mechanical properties of AA7075 sheets by using cryorolling and subsequent ageing. Journal of Alloys and Compounds, 2023, 931: 167556https://doi.org/10.1016/j.jallcom.2022.167556.

  

周岳新

2020.9~2023.6. 2020级硕士研究生(Master Student),中南大学综合选拔本科生,研究方向为深冷轧制铝合金材料搅拌摩擦焊接及性能研究

毕业去向:哈尔滨工业大学(深圳校区)攻读博士

已发表学术成果:

1.  Zhou Y.X., Xiong H.Q., Jiang J., Yang S.S., Tan Z., Kong C., Yu H.L.* Effect of low-temperature pre-aging on microstructure and mechanical properties of AA2024 sheets by cryorolling. JOM, 2022, https://doi.org/10.1007/s11837-022-05616-2.

2. Zhou Y.X., Xiong H.Q., Zhang Y., Kong C., Yu H.L.* Microstructure and mechanical properties of ultrafine-grained AA2024 sheets joined by underwater friction stir welding. Materials Characterization, 2023, https://doi.org/10.1016/j.matchar.2023.112749.

  

包天闻

2020.9-2023.6. 2020级硕士研究生(Master Student留学生)

毕业去向:回几内亚工作

论文发表:

1)Bah T.A., Waqas F., Yu H.L.* Mechanical Properties and Microstructure Evolution of an AA5083 via Introducing 0.33%Sc and Cryorolling. Solid State Phenomena, 2023, 353: 3-10. https://doi.org/10.4028/p-hIfLO5(Invited Talk to Yu H.L.)

  

刘娟

2019.9~2022.6,课题组硕士研究生(Master Student)。中南大学推免生(本科阶段班级第一名)。研究方向为高性能Cu/Ni层状轧制过程界面演变机制。获2020年豪鹏国际奖励金、2021年国家奖学金。获2020-2021学年中南大学研究生优秀学生称号,中南大学2022届优秀毕业生。硕士论文外审成绩1A1B。

已经发表学术论文:

1) Liu J., Wu Y.Z., Gao H.T., Kong C., Yu H.L.* Enhanced mechanical properties and thermal stability of accumulative roll bonded Cu/Nb multilayer composites via cryorolling. Metallurgical and Materials Transactions A, 2022, https://doi.org/10.1007/s11661-022-06902-z 

2)Yu H.L.*, Liu J., Wang L. Improvement of mechanical properties of laminated composites by using cryogenic roll bonding. THERMEC 2021, accepted. 2020-4-14. (Keynote). Materials Science Forum, 2021, 1016: 1696-1702. https://www.scientific.net/MSF.1016.1696 

3)Liu J., Wu Y.Z., Wang L., Kong C., Pesin A., Zhilyaev A.P., Yu H.L.* Fabrication and Characterization of High Bonding Strength Al/Ti/Al-Laminated Composites via Cryorolling. Acta Metallurgical Sinica (English Letters), 2020, 33: 871–880. https://doi.org/10.1007/s40195-020-01041-z . 

4)Ouyang Y.X.#, Liu J.#, Xin Y., Zhu W.K., Yu H.L.*, Wang L.B.* Large-scale synthesis of metal nanosheets as highly active catalysts: combining accumulative roll-bonding and etching process. Frontier of Materials Science, 2021, https://doi.org/10.1007/s11706-021-0566-4  .

毕业去向:中国航发湖南动力机械研究所(事业编制)

  

余飞龙

2019.9~2022.6,课题组硕士研究生(Master Student),长春理工大学推免硕士生。研究方向为高性能钛合金深冷轧制与性能研究。2021年获研究生创新项目资助:深冷轧制钛合金超塑性性能及变形机理研究,荣获中南大学2022届优秀毕业生称号。硕士论文外审成绩2A,硕士论文获评2022 年度NFSOC优秀硕士学位论文。

已经发表学术论文:

1. Yu F.L., Zhang Y., Kong C., Yu H.L.* High strength and toughness of Ti-6Al-4V sheets via cryorolling and short-period annealing. Mater. Sci. Eng. A, 2022https://doi.org/10.1016/j.msea.2022.143766

2. Yu F.L., Zhang Y.*, Kong C., Yu H.L.* Microstructure and mechanical properties of Ti-6Al-4V alloy sheets via room-temperature rolling and cryorolling. Mater. Sci. Eng. A, 2022,834: 142600. https://doi.org/10.1016/j.msea.2022.142600. 审稿人评价"This is a thorough and interesting study."

3. Yu F.L., Kong C., Yu H.L.* Low-temperature superplasticity of cryorolled Ti-6Al-4V titanium alloy sheets. Tungsten, 2022. (Invited paper)

毕业去向:上海交通大学攻读博士学位。

  

刘粤

2018.9-2021.6. 硕士研究生(Master Student),西安建筑科技大学本科毕业。研究方向为汽车板铝合金深冷轧制制备与时效机制研究。获2020年中南大学优秀硕士研究生干部、湖南省优秀研究生毕业生(http://jyt.hunan.gov.cn/jyt/sjyt/xxgk/tzgg/202104/t20210421_1040165.html)、其硕士学位论文获2021年中国有色金属学会优秀硕士学位论文奖

发表学术论文:

1.    Liu Y., Zhao X.S., Li J., Bhatta L., Luo K.G., Kong C., Yu H.L.* Mechanical properties of rolled and aged AA6061 sheets at room-temperature and cryogenic environments. Journal of Alloys and Compounds, 2021, 860: 158449. https://doi.org/10.1016/j.jallcom.2020.158449 (https://authors.elsevier.com/a/1cKoW_L3HTPevy 用该链接2021年2月19日前免费下载)

 2. 刘粤,赵祥帅,Kong C.,喻海良*. 轧制及时效对AA6061铝合金深冷力学性能的影响. 塑性工程学报, 2021,28(5):76-83.

毕业去向:荣耀

  

赵祥帅

2018.9-2021.6,硕士研究生(Master Student),杭州电子科技大学统招学术型研究生。研究方向为深冷轧制制备极薄铜箔性能。获2020年豪鹏国际奖励金,2020年中南大学优秀硕士研究生称号,中南大学优秀研究生毕业生

已经发表学术论文:

1. 赵祥帅,刘粤,Kong C.喻海良*. 异步轧制与退火铜箔的厚度尺寸效应研究塑性工程学报 ,2021,28(5):126-133.

2.Yu H.L.*, Zhao X.S.Kong C. Mechanical properties of rolled copper foils in cryogenic and room-temperature environments, Advanced Engineering Materials, 2021, https://doi.org/10.1002/adem.202100830 

毕业去向:中兴

  

张朝阳

2018.9-2021.6 硕士研究生(Master Student)。青海大学推免研究生。研究方向为深冷异步轧制制备CrCoNi中熵合金的高强高韧性能与机理研究。获2020年中南大学优秀硕士研究生、中南大学优秀研究生毕业生

2020年获研究生创新项目资助:深冷异步轧制制备CrCoNi中熵合金的高强高韧性能与变形机理研究。

发表学术论文:

1.    Zhang Z.Y., Wu Y.Z., Li C., Gan B.*, Kong C., Wang Y., Yu H.L.* Annealing effect on mechanical properties of asymmetric cryorolled CrCoNi medium entropy alloy. Materials Today Communications, 2020, https://doi.org/10.1016/j.mtcomm.2020.101776

2.    张朝阳Charlie Kong,喻海良*. 深冷异步轧制及退火处理对CrCoNi中熵合金微观结构演变和力学性能影响. 塑性工程学报 ,2021,28(5):35-43(入选中国机械工程学会2023年优秀科技论文)

毕业去向:上汽

  

Laxman Bhatta(巴泰)

2018.9-2021.6,硕士研究生(Master Student留学生),研究方向为深冷轧制制备5XXX铝合金带材及其超塑性性能研究。获中南大学2021届国际学生优秀毕业生(全校10人)。

已发表学术论文:

1. Bhatta L., Pesin A., Zhilyaev A.P., Tandon P., Kong C., Yu H.L.* Recent development of superplasticity in aluminium alloy: a review. Metals, 2020, 10: 77. https://doi.org/10.3390/met10010077

毕业去向:美国Oregon State University攻读博士学位,全额奖学金

  

李畅

2018.9-2021.6 硕士研究生(Master Student)。淮海工学院统招非全日制专硕型研究生。研究方向为铝锂合金深冷轧制制备与性能研究。

发表学术论文:

1)  Li C., Xiong H.Q., Bhatta L., Wang L., Zhang Z.Y., Wang H., Kong C., Yu H.L.* Microstructure evolution and mechanical properties of an Al-3.6Cu-1Li alloy via cryorolling and aging. Transactions of Nonferrous Metals of Society of China, 2020, 30: 2904−2914. https://doi.org/10.1016/S1003-6326(20)65430-9 

毕业去向:中车

  

聂宁

2020.7~2021.12 访问博士研究生。澳大利亚伍伦贡大学博士研究生。

发表学术论文:

1.    Nie N., Su L.H.*, Li H.J., Yu H.L., Tieu K. Surface roughening on free surface and semi-free interface during plastic deformation. Journal of Materials Research and Technology, 2021, https://doi.org/10.1016/j.jmrt.2021.11.087.

  

姚艺峰

2020.9-2021.10 科研助理

  

王晗

2019年毕业本科生-美国伊利诺伊大学厄巴纳-香槟分校攻读硕士学位