Journal Publications

• [1]Jiang Bingyan, Zhou Zhou, Wu Wangqing. Experiment investigation of stamp forming of continuous glass fiber reinforced thermoplastics with vacuum technology[J]. Oxidation Communication, 2016(SCI, submitted)
• [2]Jiang Bingyan, Zhou Zhou, Wu Wangqing. Stamping forming of commingled E-glass/polypropylene fabric with vacuum technology[J]. Materials Science Forum, 2016.（EI, adopted）
• [3]JIANG Bingyan, WENG Can, ZHOU Mingyong. Improvement on replication quality of electroformed nickel mold inserts with micronano structures [J]. Int Commun Heat Mass, 2016, accepted.(SCI)
• [4]JIANG Bingyan, ZHOU Mingyong, WENG Can et, al. Experimental study on the replication quality of micro-nano cross-shaped structure arrays in injection molding [J]. Microsyst Technol, 2016, DOI 10.1007/s00542-016-2819-1.(SCI)
• [5]JIANG Bingyan, ZHOU Mingyong, WENG Can et, al. Fabrication of nanopillar arrays by combining electroforming and injection molding [J]. Int J Adv Manuf Technol, 2016. DOI 10.1007/s00170-015-8260-2.(SCI)
• [6]JIANG Bing-yan.ZHOU Ming-yong.ZHANG Lu.LU Li-jun.WENG Can.molding nanostructures by template method and their hydrophobic properties[J].Optics and Precision Engineering ,2015,23(1):165-173. (EI)
• [7]JIANG Bing-Yan.ZHUANG Chao-Wei.ZHAO Dang-Jun.HAN Jing-Ze.Quadrotor Aircraft Controller Based on Tracking Differentiator[J].,Computer Simulation ,2015(5):114-118.(EI)
• [8]Bingyan Jiang.Mingyong Zhou.Lijun Lu.Can Weng.Molecular dynamic simulation of injection molded nanostructures[J].Polymer Materials Science &Engineering, ,2015,31(9):122-126.(EI)
• [9]Jiang Bingyan, Chen Zhuo, Zhou Zhou. Effect of wall thickness of hollow sphere on the stress distribution of random hollow sphere syntactic foam[J]. Applied Mechnanics and Maerials. 2014, 670-671: 630-633.(EI)
• [10]JIANG Bingyan, ZHOU Zhou, CHEN Xingkai, JIANG Fengze, JIAN Yuping. Rheological Behavior and Process Prediction of Low Viscosity Epoxy Resin for RTM[J]. Journal of Wuhan University of Technology-Mater. Sci. Ed. 2014, 29(5):1078-1082.（SCI）
• [11]Jiang Bingyan, Lei Chen, Stefan Kirchberg, etc.. Fabrication of long focal length plano-convex microlens array by combining the micro-milling and injection molding process. Applied Optics. 2014, 53(31): 7369-7380 (SCI)
• [12]Jiang Bingyan, Zhou Zhou, He Fangfang, Chen Xingkai. Curing Rheological Properties and Process Determination of Low Viscosity Epoxy Resin for RTM[J]. Energy Education Science and Technology Part A: Energy Science and Research. 2014, 32(2): 913-922.(EI)
• [13]Jiang Bingyan,Chu Chunpeng,Weng Can.Microchannel deformation of polymer chip in in-mold bonding.INTERNATIONAL POLYMER PROCESSING.2014,29(2):245-251.(SCI)
• [14]JIANG Bing-yan,YUAN Li. Landing Gear Spatial Retractable Mechanism Analysis and Simulation[J]. Machinery Design & Manufacture, 2014(4):143-145,149.[EI]
• [15]Jiang Bing-yan,Zhou Ming-yong,Lu Li-jun,Zhang Lu,Chen Lei.Progress in Research on Polymer Nano/Sub-micro Structures by Injection Molding[J].Journal of Materials Engineering,2014,4:95-100. (EI)
• [16]Jiang Bing-yan, Zhou-Zhou，Wei Yao-wei，Ju Jia-lu.Simulation Analysis for Mechanical Performance of Advanced Composite Grid Structures[J]. China Plastics Industry
• [17]Jiang Bingyan, Chen Xingkai, Zhou Zhou. Optimization of CFRP pultrusion process with NSGA-II and ANN[J]. Advanced Materials Research. 2013, 662: 145-148.(EI)
• [18]Jiang Bingyan, Chen Lei, Stefan Kirchberg, etc.. Replication, characterization and simulation of micro injection molded microlens arrays using technical amorphous polymers. Key Engineering Materials. 2013, (562-565): 458-464 (EI)
• [19]Jiang Bing-yan，Chu Chun-peng，Zhou Lu-teng.Injection Moulding of Polymeric microfluidic chip[J]，Polymer Materials Science & Engineering，2013,29（6）：113-116.（EI）
• [20]Jiang Bing-yan,He Fang-fang, Zhou Zhou. Prediction of melt flowability and fiber orientation for fiber reinforced polymer injection molding[J]. Acta Materiae Compositae Sinica, 2013, 30: 128-133.(EI)